{"title":"All In Stock Filament","description":"","products":[{"product_id":"standard-pla-daffodil-yellow-1-75mm","title":"Standard PLA+, Daffodil Yellow, 1.75mm","description":"\u003cp\u003eDaffodil Yellow is a fresh, bright yellow, like a patch of daffodils in spring.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Daffodil Yellow","offer_id":39755421352001,"sku":"A1506","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Daffodil Yellow","offer_id":40172941246529,"sku":"A1706","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-daffodil-yellow-175mm-994109.jpg?v=1762457043"},{"product_id":"standard-pla-island-fuchsia-1-75mm","title":"Standard PLA+, Island Fuchsia, 1.75mm","description":"\u003cp\u003eNot quite magenta and not quite purple, Island Fuchsia sits right in between. Some people call it Barney Purple; either way, it makes prints pop.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Island Fuchsia","offer_id":39755421286465,"sku":"A15E9","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Island Fuchsia","offer_id":40172942131265,"sku":"A17E9","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-island-fuchsia-175mm-903475.jpg?v=1762457043"},{"product_id":"standard-pla-industrial-gray-1-75mm","title":"Standard PLA+, Industrial Gray, 1.75mm","description":"\u003cp\u003eIndustrial Gray is a smooth, cool mid gray for prototypes and scale models; it paints easily.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Industrial Gray","offer_id":39755421188161,"sku":"A1502","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Industrial Gray","offer_id":40172943081537,"sku":"A1702","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-industrial-gray-175mm-925870.jpg?v=1762457045"},{"product_id":"standard-pla-midnight-black","title":"Standard PLA+, Midnight Black, 1.75mm","description":"\u003cp\u003eMidnight Black is our best-selling Standard PLA+ color: a deep, consistent black PLA filament that hides layer lines and works for everything from functional parts to display pieces.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Midnight Black","offer_id":39755421122625,"sku":"A1501","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Midnight Black","offer_id":40172943016001,"sku":"A1701","price":84.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Midnight Black","offer_id":40172943048769,"sku":"A1901","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-midnight-black-175mm-705618.jpg?v=1762457045"},{"product_id":"standard-pla-standard-white-1-75mm","title":"Standard PLA+, Snow White, 1.75mm","description":"\u003cp\u003eSnow White is a clean, neutral white and one of our most popular colors. Architectural and engineering models look fantastic in it. For a brighter, bluer white, see Brightest White.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Snow White","offer_id":39755421057089,"sku":"A1503","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Snow White","offer_id":40172943179841,"sku":"A1703","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-snow-white-175mm-578646.jpg?v=1762457047"},{"product_id":"3d-clean-1-75mm","title":"3D Clean, Cleaning and Purging Filament, 1.75mm","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"font-size: 1.6em;\"\u003eClean your 3D printer's hot-end and nozzle with 3D Clean™ by 3D-Fuel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3D Clean is a non-chemical, non-abrasive thermoplastic purging\/cleaning compound that is safe for both the operator and the 3D printer.\u003c\/p\u003e\n\u003cp\u003eAvailable in 8-inch segments or in 25g coils (1.75mm and\/or 2.85mm diameter), 3D Clean™ is specially designed by 3D-Fuel with 3D printers in mind and comes ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Settings \u003c\/strong\u003e\u003cbr\u003eUse 3D-Fuel 3D Clean™ at 230°C unless the material being purged out requires a higher temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use it:\u003c\/strong\u003e step-by-step purging, cold pulls and full clogs are covered in our guide, \u003ca href=\"\/blogs\/news\/how-to-clean-a-3d-printer-nozzle\"\u003eHow to Clean a 3D Printer Nozzle\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Clean_by_3D-Fuel_-_SDS.pdf?v=1752190139\" title=\"3D-Clean by 3D-Fuel Purging material SDS\" rel=\"noopener\" target=\"_blank\"\u003e3D-Clean SDS\/TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e 50 Sticks (1.75mm) or 35 Sticks (2.85mm) of 8-inch 3D Clean™ plastic filament arrive in a tube with a desiccant packet to keep out any moisture. Coils come in 25g and 100g coils of 1.75mm or 2.85mm. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e The 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, AnyCubic, Snapmaker, FlashForge, and more. We 3D print what we manufacture to ensure that our filament provides the absolute best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"3D-Clean \/ 1.75mm 3D Clean Tube \/ Natural","offer_id":12773369479280,"sku":"D1A00","price":18.0,"currency_code":"USD","in_stock":true},{"title":"3D-Clean \/ 25g 1.75mm 3D Clean Coil \/ Natural","offer_id":30299138031681,"sku":"D1C00","price":18.0,"currency_code":"USD","in_stock":true},{"title":"3D-Clean \/ 100g 1.75mm 3D Clean Coil \/ Natural","offer_id":44481834942780,"sku":"D1E00","price":40.0,"currency_code":"USD","in_stock":false},{"title":"3D-Clean \/ 1kg 1.75mm Spool \/ Natural","offer_id":53968852713788,"sku":"D1500","price":149.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/dyna-purge-3d-clean-cleaningpurging-175mm-119514.jpg?v=1762457049"},{"product_id":"pro-pla-natural-1-75mm","title":"Tough Pro PLA+, Natural, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Natural is uncolored and translucent, with a slight yellowish hue. Use it for prototypes and test parts, or when you want the part, not its color, to stand out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Natural","offer_id":39755409129537,"sku":"A3500","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Natural","offer_id":40172939608129,"sku":"A3700","price":104.95,"currency_code":"USD","in_stock":false},{"title":"Tough Pro PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Natural","offer_id":40172939640897,"sku":"A3900","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-natural-175mm-578751.jpg?v=1762457051"},{"product_id":"pro-pla-industrial-gray","title":"Tough Pro PLA+, Industrial Gray, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Industrial Gray is a smooth, cool mid-gray for an industrial look. It's a good pick for prototypes, fixtures and models you plan to paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Industrial Gray","offer_id":39755408539713,"sku":"A3502","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Industrial Gray","offer_id":40172938887233,"sku":"A3702","price":104.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Industrial Gray","offer_id":43663717892412,"sku":"A3902","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-industrial-gray-175mm-796723.jpg?v=1762457051"},{"product_id":"pro-pla-midnight-black-1-75mm","title":"Tough Pro PLA+, Midnight Black, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Midnight Black is our best-selling color, a true, deep black. It suits tools, mounts, functional parts and anything that should look clean and understated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Midnight Black","offer_id":39755408474177,"sku":"A3501","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Midnight Black","offer_id":40172939345985,"sku":"A3701","price":104.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Midnight Black","offer_id":40172939378753,"sku":"A3901","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-midnight-black-175mm-498062.jpg?v=1762457053"},{"product_id":"pro-pla-snow-white-1-75mm","title":"Tough Pro PLA+, Snow White, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Snow White is a clean, neutral white, softer than our Brightest White. It's a go-to for architectural and engineering models, enclosures and parts you plan to paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Snow White","offer_id":39755408408641,"sku":"A3503","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Snow White","offer_id":40172940132417,"sku":"A3703","price":104.95,"currency_code":"USD","in_stock":false},{"title":"Tough Pro PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Snow White","offer_id":43663718023484,"sku":"A3903","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-snow-white-175mm-485973.jpg?v=1762457053"},{"product_id":"pro-pla-fire-engine-red-1-75mm","title":"Tough Pro PLA+, Fire Engine Red, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Fire Engine Red is a bright, classic red for parts and accessories that need to stand out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Fire Engine Red","offer_id":39755408343105,"sku":"A3504","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Fire Engine Red","offer_id":40172937707585,"sku":"A3704","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-fire-engine-red-175mm-458882.jpg?v=1762457054"},{"product_id":"pro-pla-ocean-blue-1-75mm","title":"Tough Pro PLA+, Ocean Blue, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Ocean Blue is a deep, saturated blue, a strong all-round blue for functional parts, enclosures and accents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Ocean Blue","offer_id":39755408277569,"sku":"A3508","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Ocean Blue","offer_id":40172939870273,"sku":"A3708","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-ocean-blue-175mm-954880.jpg?v=1762457055"},{"product_id":"standard-pla-natural-1-75mm","title":"Standard PLA+, Natural, 1.75mm","description":"\u003cp\u003eNatural is our uncolored Standard PLA+: translucent with a slight yellow tint, not glass-clear. For the clearest parts, print slower, slightly hotter and with more walls.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Natural","offer_id":39755420991553,"sku":"A1500","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Natural","offer_id":40172942688321,"sku":"A1700","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-natural-175mm-516985.jpg?v=1762457055"},{"product_id":"pro-pla-tangerine-orange-1-75mm","title":"Tough Pro PLA+, Tangerine Orange, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Tangerine Orange is a bright, true orange for parts that need to be seen, from tool handles to accents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Tangerine Orange","offer_id":39755408048193,"sku":"A3505","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Tangerine Orange","offer_id":40172940197953,"sku":"A3705","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-tangerine-orange-175mm-749115.jpg?v=1762457057"},{"product_id":"standard-pla-fire-engine-red-1-75mm","title":"Standard PLA+, Fire Engine Red, 1.75mm","description":"\u003cp\u003eFire Engine Red is one of our most popular colors: a classic, true red for parts and accessories.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Fire Engine Red","offer_id":39755420926017,"sku":"A1504","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Fire Engine Red","offer_id":40172941508673,"sku":"A1704","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-fire-engine-red-175mm-701465.jpg?v=1762457057"},{"product_id":"standard-pla-grass-green-1-75mm","title":"Standard PLA+, Grass Green, 1.75mm","description":"\u003cp\u003eGrass Green is a deep, dark green for any job that needs one.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Grass Green","offer_id":39755420696641,"sku":"A1507","price":22.95,"currency_code":"USD","in_stock":false},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Grass Green","offer_id":40172941836353,"sku":"A1707","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-grass-green-175mm-235379.jpg?v=1762457058"},{"product_id":"standard-pla-ocean-blue-1-75mm","title":"Standard PLA+, Ocean Blue, 1.75mm","description":"\u003cp\u003eLike the deep ocean itself, Ocean Blue is a deep, saturated blue.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Ocean Blue","offer_id":39755420631105,"sku":"A1508","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Ocean Blue","offer_id":40172942753857,"sku":"A1708","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-ocean-blue-175mm-805161.jpg?v=1762457058"},{"product_id":"pro-petg-clearly-natural-1-75mm","title":"Pro PETG, Clearly Natural, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Clearly Natural is our clear, transparent Pro PETG.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\nManufactured from 100% virgin PETG resin, Pro PETG is a fantastic, economical 3D printing material. Natural Pro PETG filament has fantastic optical properties, resulting in nearly transparent prints with amazing light transmission. Different layer heights and print settings will affect how your 3D printed parts pass light.\n\u003cp\u003ePETG is a newer printing filament with the advantage of printing easily like PLA, but offering higher temp and impact resistance like ABS. Nearly ZERO warpage prints, extremely strong layer bonds, little to no odor at all. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed 2.85 mm?\u003c\/strong\u003e \u003ca href=\"\/products\/pro-petg-natural-2-85mm\"\u003eNatural Pro PETG is also available in 2.85 mm\u003c\/a\u003e, made to order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Settings (settings will vary from printer to printer)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrint nozzle temp:\u003c\/strong\u003e 245 - 265C (Our PETG Prints a little hotter than some.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeated Bed temp:\u003c\/strong\u003e 70 - 80C\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Pro PETG SDS in PDF Format\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload SDS for Pro PETG\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Pro PETG TDS in PDF\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\"\u003eDownload TDS for Pro PETG\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool. Learn more about 3D-Fuel filament quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e A full 1kg (2.2lbs) of Natural Pro PETG plastic filament arrives on an easy-to-use, \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374-What-are-the-sizes-and-weights-of-your-spools\"\u003eAMS-compatible plastic spool\u003c\/a\u003e and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e The 3D-Fuel test lab features multiple brands of 3D printers including MakerBot, LulzBot, FlashForge, and more. We 3D print what we manufacture to ensure that our filament provides the absolute best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PETG \/ 1kg 1.75mm Spool \/ Natural","offer_id":17980471246913,"sku":"E1500","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Pro PETG \/ 4kg 1.75mm Spool \/ Natural","offer_id":40172947898433,"sku":"E1700","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-petg-natural-175mm-434020.jpg?v=1762457064"},{"product_id":"pro-petg-midnight-black-1-75mm","title":"Pro PETG, Midnight Black, 1.75mm","description":"\u003c!-- more --\u003e\n\u003ch1\u003ePro PETG Filament - Midnight Black\u003c\/h1\u003e\n\u003cp\u003eManufactured from 100% virgin PETG resin, Pro PETG is a fantastic, economical 3D printing material. Midnight Black Pro PETG filament has the advantage of printing easily like PLA, but offering higher temp and impact resistance like ABS. Nearly ZERO warpage prints, extremely strong layer bonds, little to no odor at all. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed 2.85 mm?\u003c\/strong\u003e \u003ca href=\"\/products\/pro-petg-midnight-black-2-85mm\"\u003eMidnight Black Pro PETG is also available in 2.85 mm\u003c\/a\u003e, made to order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Settings (settings will vary from printer to printer)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint nozzle temp:\u003c\/strong\u003e 245 - 265C (Our PETG Prints a little hotter than some.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeated Bed temp:\u003c\/strong\u003e 70 - 80C\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Pro PETG SDS in PDF Format\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload SDS for Pro PETG\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Pro PETG TDS in PDF\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\"\u003eDownload TDS for Pro PETG\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool. Learn more about 3D-Fuel filament quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e A full 1kg (2.2lbs) of Midnight Black Pro PETG plastic filament arrives on an easy-to-use, \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374-What-are-the-sizes-and-weights-of-your-spools\"\u003eAMS-compatible plastic spool\u003c\/a\u003e and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e The 3D-Fuel test lab features multiple brands of 3D printers including MakerBot, LulzBot, FlashForge, and more. We 3D print what we manufacture to ensure that our filament provides the absolute best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PETG \/ 1kg 1.75mm Spool \/ Midnight Black","offer_id":17980488745025,"sku":"E1501","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Pro PETG \/ 4kg 1.75mm Spool \/ Midnight Black","offer_id":40172947603521,"sku":"E1701","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-petg-midnight-black-175mm-442935.jpg?v=1762457064"},{"product_id":"pro-pla-daffodil-yellow-1-75mm","title":"Tough Pro PLA+, Daffodil Yellow, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Daffodil Yellow is a fresh, bright spring yellow. For a darker, richer yellow, see Harvest Gold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Daffodil Yellow","offer_id":39755407884353,"sku":"A3506","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Daffodil Yellow","offer_id":40172937314369,"sku":"A3706","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-daffodil-yellow-175mm-107829.jpg?v=1762457067"},{"product_id":"pro-pla-electric-blue-1-75mm","title":"Tough Pro PLA+, Electric Blue, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Electric Blue is one of our lightest blues, sometimes called springtime or robin's egg blue. It suits pastel and springtime projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Electric Blue","offer_id":40163731341377,"sku":"A35E8","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Electric Blue","offer_id":40172937412673,"sku":"A37E8","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-electric-blue-175mm-456758.jpg?v=1762457068"},{"product_id":"pro-pla-island-fuchsia-1-75mm","title":"Tough Pro PLA+, Island Fuchsia, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Island Fuchsia sits between magenta and purple, a shade some people call Barney purple. It makes prints pop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Island Fuchsia","offer_id":29441040941121,"sku":"A35E9","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Island Fuchsia","offer_id":40172938821697,"sku":"A37E9","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-island-fuchsia-175mm-528091.jpg?v=1762457069"},{"product_id":"pro-pla-metallic-silver-1-75mm","title":"Tough Pro PLA+, Metallic Silver, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Silver has a metal-like sheen with no metal or abrasives in it. It suits props, cosplay armor and mechanical-looking parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Metallic Silver","offer_id":39755407753281,"sku":"A35MS","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Metallic Silver","offer_id":40172940066881,"sku":"A37MS","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-metallic-silver-175mm-900662.jpg?v=1762457069"},{"product_id":"standard-pla-tangerine-orange-1-75mm","title":"Standard PLA+, Tangerine Orange, 1.75mm","description":"\u003cp\u003eTangerine Orange is a bright, saturated orange for safety-colored parts, team colors and anything that needs to be seen.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Tangerine Orange","offer_id":39755420467265,"sku":"A1505","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Tangerine Orange","offer_id":40172943245377,"sku":"A1705","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-tangerine-orange-175mm-579298.jpg?v=1762457071"},{"product_id":"pro-pla-iron-red-1-75mm","title":"Tough Pro PLA+, Iron Red, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Iron Red is a deep, dark, rust-like red. It suits armor, props and any project that calls for a darker red than Fire Engine Red.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Iron Red","offer_id":39755407687745,"sku":"A35A3","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Iron Red","offer_id":40172939018305,"sku":"A37A3","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-iron-red-175mm-282288.jpg?v=1762457071"},{"product_id":"standard-pla-filament-metallic-silver-1-75mm","title":"Standard PLA+, Metallic Silver, 1.75mm","description":"\u003cp\u003eMetallic Silver gives a metal-like shimmer with no metal powder or abrasive fill, so it prints on a standard brass nozzle. It looks best on smooth, glossy surfaces; print a little slower or hotter for more shine.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Metallic Silver","offer_id":39755420008513,"sku":"A15MS","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Metallic Silver","offer_id":40172943114305,"sku":"A17MS","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-metallic-silver-175mm-334729.jpg?v=1762457077"},{"product_id":"standard-pla-filament-autumn-orange-1-75mm","title":"Standard PLA+, Autumn Orange, 1.75mm","description":"\u003cp\u003eAutumn Orange is a burnt orange for fall decor, team colors and earthy accents.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Autumn Orange","offer_id":39755419942977,"sku":"A15A5","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Autumn Orange","offer_id":40172940689473,"sku":"A17A5","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-autumn-orange-175mm-999050.jpg?v=1762457077"},{"product_id":"standard-pla-filament-iron-red-1-75mm","title":"Standard PLA+, Iron Red, 1.75mm","description":"\u003cp\u003eIron Red is a deep, dark, rust-like red for any project that needs a darker red than Fire Engine Red.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Iron Red","offer_id":39755419877441,"sku":"A15A3","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Iron Red","offer_id":40172942262337,"sku":"A17A3","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-iron-red-175mm-460629.jpg?v=1762457078"},{"product_id":"pro-pla-filament-autumn-orange-1","title":"Tough Pro PLA+, Autumn Orange, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Autumn Orange is a burnt orange. Use it for fall and Halloween projects, pumpkins and any print that needs a darker orange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Autumn Orange","offer_id":39755407622209,"sku":"A35A5","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Autumn Orange","offer_id":40172936298561,"sku":"A37A5","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-autumn-orange-175mm-531826.jpg?v=1762457078"},{"product_id":"refuel-pla-recycled-filament","title":"ReFuel PLA+, Recycled (Standard or Tough Pro), 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/blogs\/news\/what-is-refuel-a-transparent-look-at-3d-fuels-recycled-3d-printing-filament\" target=\"_blank\" title=\"refuel recycled 3D printer filament information\" rel=\"noopener\"\u003eReFuel™ is recycled 3D filament from out-of-spec materials\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eColors Vary - No Color Selection - \u003cspan style=\"color: #ff00ff;\"\u003eAS-IS\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #fa0707;\"\u003ePlease Read:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eThis is the same material as our regular Standard and Tough Pro PLA+ product lines. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe've taken our PLA scraps and out-of-spec material (spools that were rejected during production due to over- or under-diameter readings), transition material, and cut-off waste and cut it into pellets that we can use to make filament!\u003c\/p\u003e\n\u003cp\u003eIt works excellently, prints great, and is almost equal to our regular PLA lineup.  We f\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eollow the same quality guidelines. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe're just not printing the full-color box labels. Just a simple thermal label on a kraft box to save money - we are mainly doing this to recover the scrap material and\u003c\/span\u003e keep it out of the landfills. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWant raw material instead?\u003c\/strong\u003e Our \u003ca href=\"\/products\/refuel-recycled-regrind\"\u003eReFuel recycled pellets\u003c\/a\u003e are mixed-color 3D-Fuel scrap ground into pellets for your own projects, sold by the kilogram.\u003c\/p\u003e\n\u003cp\u003eThis is a very usable material, especially for prototyping.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor: \u003cspan style=\"color: #fa0404;\"\u003eColor will vary on this product.\u003c\/span\u003e\u003c\/strong\u003e It is made of just about every color we make.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSince we mix ALL colors to make ReFuel, colors will be mostly darker earth tones like black, brown and red shades, but can vary from clear to grayish-white to nearly black.\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eNo color selection is available.\u003c\/span\u003e None are equal to our standard colors. Most likely, the items you receive in a single order will be all about the same shade and color as they will have been made at the same time.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e ReFuel comes vacuum-sealed with desiccant in a plain brown box with minimal labeling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003eTo keep this product simple, \u003cspan style=\"color: #f90707;\"\u003e\u003cstrong\u003ewe only offer it only in 1.75mm 1kg and 4kg spools.\u003c\/strong\u003e\u003c\/span\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility: \u003c\/strong\u003eThe Standard and Tough Pro PLA+ versions should work in any printer that uses 1.75mm filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Tough Pro PLA+ is the best PLA product available for printing your projects.\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/products\/pro-pla-midnight-black-1-75mm\" title=\"Learn More about our Tough Pro PLA+ here.\"\u003eLearn More about our Tough Pro PLA+ here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard PLA+ combines standard materials with our excellent quality standards, providing you with the best regular PLA available anywhere.\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/collections\/175spla\/products\/ingeo-pla-standard-black\" title=\"Learn more about our Standard PLA+ here.\"\u003eLearn more about our Standard PLA+ here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e \u003cbr\u003eAll 3D-Fuel ReFuel 3D printer filament is manufactured in Fargo, ND. We have complete control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Filament Quality\" href=\"\/pages\/filament-quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e \u003cbr\u003eVariable diameter can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e \u003cbr\u003eA full 1kg (2.2 lbs) or 4kg (8.8 lbs) of Re-Fuel recycled 3D printing filament arrives on an easy-to-use plastic reel, which is vacuum sealed with a desiccant packet to keep out moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e \u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including Bambu Lab, Creality3D, Prusa, Elegoo, and more. We 3D print what we manufacture to ensure that our filament provides the absolute best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ ReFuel (You never know what you'll get!)","offer_id":40088970526785,"sku":"A15R0","price":12.98,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ ReFuel (You never know what you'll get!)","offer_id":44060579889468,"sku":"A17R0","price":91.6,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ ReFuel (You never know what you'll get!)","offer_id":40172940361793,"sku":"A35R0","price":16.48,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ ReFuel (You never know what you'll get!)","offer_id":40172940394561,"sku":"A37R0","price":107.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/refuel3d-fuel-recycled-standard-or-tough-pro-pla-175mm-862229.jpg?v=1762457079"},{"product_id":"pro-pla-filament-chocolate-brown-1-75mm","title":"Tough Pro PLA+, Chocolate Brown, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Chocolate Brown is a rich, dark brown that looks just like real chocolate. Just don't try to eat it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Chocolate Brown","offer_id":39755407523905,"sku":"A35A1","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Chocolate Brown","offer_id":40172936888385,"sku":"A37A1","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-chocolate-brown-175mm-147421.jpg?v=1762457079"},{"product_id":"pro-pla-filament-charcoal-gray-1-75mm","title":"Tough Pro PLA+, Charcoal Gray, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Charcoal Gray is a dark, cool gray for parts where Midnight Black is too dark.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Charcoal Gray","offer_id":32057873760321,"sku":"A35A2","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Charcoal Gray","offer_id":40172950388801,"sku":"A37A2","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-charcoal-gray-175mm-689597.jpg?v=1762457081"},{"product_id":"pro-pla-filament-grape-purple-1-75mm","title":"Tough Pro PLA+, Grape Purple, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Grape Purple is a solid, true purple for when your project needs a purple that can take a hit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Grape Purple","offer_id":39755407458369,"sku":"A3509","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Grape Purple","offer_id":40172938625089,"sku":"A3709","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-grape-purple-175mm-805925.jpg?v=1762457081"},{"product_id":"pro-pla-filament-brightest-white-1-75mm","title":"Tough Pro PLA+, Brightest White, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brightest White is the whitest of our whites, nearly blue-white and brighter than Snow White. Use it when you want a crisp, bright finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Brightest White","offer_id":39755407392833,"sku":"A35E3","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Brightest White","offer_id":40172936659009,"sku":"A37E3","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-brightest-white-175mm-715049.jpg?v=1762457082"},{"product_id":"pro-pla-filament-metallic-gold-1-75mm","title":"Tough Pro PLA+, Metallic Gold, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Gold has a metal-like gold sheen with no metal or abrasives in it. It suits trophies, props and decorative parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Metallic Gold","offer_id":39755407327297,"sku":"A35MG","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Metallic Gold","offer_id":40172939509825,"sku":"A37MG","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-metallic-gold-175mm-425462.jpg?v=1762457082"},{"product_id":"pro-pla-filament-metallic-copper-1-75mm","title":"Tough Pro PLA+, Metallic Copper, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Copper has a metal-like copper sheen with no metal or abrasives in it. It suits props, steampunk builds and decorative parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Metallic Copper","offer_id":39755407228993,"sku":"A35MC","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Metallic Copper","offer_id":40172939444289,"sku":"A37MC","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-metallic-copper-175mm-878550.jpg?v=1762457084"},{"product_id":"pro-pla-filament-bubblegum-pink-1-75mm","title":"Tough Pro PLA+, Bubblegum Pink, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Bubblegum Pink is a soft pastel pink for projects that call for a lighter, gentler color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Bubblegum Pink","offer_id":39755407163457,"sku":"A35P4","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Bubblegum Pink","offer_id":40172936495169,"sku":"A37P4","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-bubblegum-pink-175mm-968203.jpg?v=1762457084"},{"product_id":"pro-pla-filament-pistachio-green-1-75mm","title":"Tough Pro PLA+, Pistachio Green, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Pistachio Green is a light, minty green for springtime projects and for accenting darker greens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Pistachio Green","offer_id":39755407065153,"sku":"A35P7","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Pistachio Green","offer_id":40172940001345,"sku":"A37P7","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-pistachio-green-175mm-591876.jpg?v=1759251631"},{"product_id":"standard-pla-filament-grape-purple-1-75mm","title":"Standard PLA+, Grape Purple, 1.75mm","description":"\u003cp\u003eGrape Purple is a solid, saturated purple for any project that needs one.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Grape Purple","offer_id":39755419779137,"sku":"A1509","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Grape Purple","offer_id":40178750849089,"sku":"A1709","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-grape-purple-175mm-974151.jpg?v=1762457085"},{"product_id":"standard-pla-filament-chocolate-brown-1-75mm","title":"Standard PLA+, Chocolate Brown, 1.75mm","description":"\u003cp\u003eChocolate Brown is a rich, dark brown that looks just like actual chocolate. Just don't try to eat it.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Chocolate Brown","offer_id":39755419713601,"sku":"A15A1","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Chocolate Brown","offer_id":40178750718017,"sku":"A17A1","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-chocolate-brown-175mm-799693.jpg?v=1762457087"},{"product_id":"standard-pla-filament-castle-gray","title":"Standard PLA+, Castle Gray, 1.75mm","description":"\u003cp\u003eCastle Gray is made for stone and masonry with detailed shadows; it is darker than Industrial Gray and lighter than Charcoal Gray.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Castle Gray","offer_id":39789300777025,"sku":"A1522","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-castle-gray-175mm-207707.jpg?v=1762457087"},{"product_id":"standard-pla-filament-caribbean-blue-1-75mm","title":"Standard PLA+, Caribbean Blue, 1.75mm","description":"\u003cp\u003eCaribbean Blue is a bright teal-blue that brings projects to life.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Caribbean Blue","offer_id":39755419582529,"sku":"A1510","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Caribbean Blue","offer_id":40172940984385,"sku":"A1710","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-caribbean-blue-175mm-944996.jpg?v=1762457088"},{"product_id":"standard-pla-filament-brightest-white-1-75mm","title":"Standard PLA+, Brightest White, 1.75mm","description":"\u003cp\u003eThe whitest of our whites, Brightest White is nearly blue-white and brighter than Snow White.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Brightest White","offer_id":39755419516993,"sku":"A15E3","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Brightest White","offer_id":40172940918849,"sku":"A17E3","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-brightest-white-175mm-888687.jpg?v=1762457088"},{"product_id":"standard-pla-filament-metallic-copper-1-75mm","title":"Standard PLA+, Metallic Copper, 1.75mm","description":"\u003cp\u003eMetallic Copper gives a copper-like shimmer with no metal powder or abrasive fill, so it prints on a standard brass nozzle. It looks best on smooth, glossy surfaces; print a little slower or hotter for more shine.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Metallic Copper","offer_id":39755419451457,"sku":"A15MC","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Metallic Copper","offer_id":40178750947393,"sku":"A17MC","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-metallic-copper-175mm-713718.jpg?v=1762457090"},{"product_id":"standard-pla-filament-metallic-gold-1-75mm","title":"Standard PLA+, Metallic Gold, 1.75mm","description":"\u003cp\u003eMetallic Gold is a gold PLA filament with a metal-like shimmer and no metal powder or abrasive fill, so it prints on a standard brass nozzle. It looks best on smooth, glossy surfaces; print a little slower or hotter for more shine.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Metallic Gold","offer_id":39755419385921,"sku":"A15MG","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Metallic Gold","offer_id":40178752946241,"sku":"A17MG","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-metallic-gold-175mm-970206.jpg?v=1762457090"},{"product_id":"standard-pla-filament-bubblegum-pink-1-75mm","title":"Standard PLA+, Bubblegum Pink, 1.75mm","description":"\u003cp\u003eBubblegum Pink is a soft pastel pink for projects that call for a gentler color.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Bubblegum Pink","offer_id":39755418927169,"sku":"A15P4","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Bubblegum Pink","offer_id":40178750685249,"sku":"A17P4","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-bubblegum-pink-175mm-692042.jpg?v=1762457091"},{"product_id":"standard-pla-filament-pistachio-green-1-75mm","title":"Standard PLA+, Pistachio Green, 1.75mm","description":"\u003cp\u003ePistachio Green is a light green for springtime projects, mint colors and accents beside darker greens.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Pistachio Green","offer_id":39755418763329,"sku":"A15P7","price":22.95,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Pistachio Green","offer_id":40178752979009,"sku":"A17P7","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-pistachio-green-175mm-299653.jpg?v=1762457091"},{"product_id":"pro-petg-snow-white-1-75mm","title":"Pro PETG, Snow White, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003eManufactured from 100% virgin PETG resin, Snow White Pro PETG is a fantastic, economical 3D printing material.\u003c\/p\u003e\n\u003cp\u003ePETG is a newer printing filament with the advantage of printing easily like PLA, but offering higher temp and impact resistance like ABS. Nearly ZERO warpage prints, extremely strong layer bonds, little to no odor at all. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Settings (settings will vary from printer to printer)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrint nozzle temp:\u003c\/strong\u003e 245 - 265C (Our PETG Prints a little hotter than some.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeated Bed temp:\u003c\/strong\u003e 70 - 80C\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Pro PETG SDS in PDF Format\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload SDS for Pro PETG\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3D-Fuel Pro PETG TDS in PDF\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\"\u003eDownload TDS for Pro PETG\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool. Learn more about 3D-Fuel filament quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real-time during production. Every spool has the diameter and ovality measurements listed right on the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e A full 1kg (2.2lbs) of Snow White Pro PETG plastic filament arrives on an easy-to-use, \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374-What-are-the-sizes-and-weights-of-your-spools\"\u003eAMS-compatible plastic spool\u003c\/a\u003e and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e The 3D-Fuel test lab features multiple brands of 3D printers including MakerBot, LulzBot, FlashForge, and more. We 3D print what we manufacture to ensure that our filament provides the absolute best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PETG \/ 1kg 1.75mm Spool \/ Snow White","offer_id":32148130660417,"sku":"E1503","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Pro PETG \/ 4kg 1.75mm Spool \/ Snow White","offer_id":40172948455489,"sku":"E1703","price":94.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-petg-snow-white-175mm-885589.jpg?v=1762457093"},{"product_id":"pro-pla-filament-aquamarine","title":"Tough Pro PLA+, Aquamarine, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Aquamarine is a calm shade on the line between light blue and light green.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Aquamarine","offer_id":39755406966849,"sku":"A35P8","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Aquamarine","offer_id":40172936200257,"sku":"A37P8","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-aquamarine-175mm-102372.jpg?v=1762457094"},{"product_id":"pro-pla-filament-forest-green-1-75mm","title":"Tough Pro PLA+, Forest Green, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Forest Green is a deep pine green, a natural fit for trees and terrain or for matching your team's colors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Forest Green","offer_id":39755406901313,"sku":"A35A7","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Forest Green","offer_id":40172937838657,"sku":"A37A7","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-forest-green-175mm-687916.jpg?v=1762457094"}],"url":"https:\/\/www.3dfuel.com\/collections\/all-in-stock-filament.oembed?page=5","provider":"3D-Fuel","version":"1.0","type":"link"}