{"title":"BFCM 2026 Extra 10% Off","description":"\u003cp\u003eBlack Friday \/ Cyber Monday: an extra 10% off these 1 kg spools, on top of our new lower everyday prices. Automatic quantity discounts still apply. Sale ends December 1, 2026.\u003c\/p\u003e","products":[{"product_id":"standard-pla-island-fuchsia-1-75mm","title":"Standard PLA+, Island Fuchsia, 1.75mm","description":"\u003cp\u003eNot quite magenta and not quite purple, Island Fuchsia sits right in between. Some people call it Barney Purple; either way, it makes prints pop.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Island Fuchsia","offer_id":39755421286465,"sku":"A15E9","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Island Fuchsia","offer_id":40172942131265,"sku":"A17E9","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-island-fuchsia-175mm-903475.jpg?v=1762457043"},{"product_id":"standard-pla-industrial-gray-1-75mm","title":"Standard PLA+, Industrial Gray, 1.75mm","description":"\u003cp\u003eIndustrial Gray is a smooth, cool mid gray for prototypes and scale models; it paints easily.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Industrial Gray","offer_id":39755421188161,"sku":"A1502","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Industrial Gray","offer_id":40172943081537,"sku":"A1702","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-industrial-gray-175mm-925870.jpg?v=1762457045"},{"product_id":"pro-pla-natural-1-75mm","title":"Tough Pro PLA+, Natural, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Natural is uncolored and translucent, with a slight yellowish hue. Use it for prototypes and test parts, or when you want the part, not its color, to stand out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Natural","offer_id":39755409129537,"sku":"A3500","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Natural","offer_id":40172939608129,"sku":"A3700","price":104.95,"currency_code":"USD","in_stock":false},{"title":"Tough Pro PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Natural","offer_id":40172939640897,"sku":"A3900","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-natural-175mm-578751.jpg?v=1762457051"},{"product_id":"pro-pla-industrial-gray","title":"Tough Pro PLA+, Industrial Gray, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Industrial Gray is a smooth, cool mid-gray for an industrial look. It's a good pick for prototypes, fixtures and models you plan to paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Industrial Gray","offer_id":39755408539713,"sku":"A3502","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Industrial Gray","offer_id":40172938887233,"sku":"A3702","price":104.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 25 lb \/ 11.3 kg 1.75mm Spool \/ Industrial Gray","offer_id":43663717892412,"sku":"A3902","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-industrial-gray-175mm-796723.jpg?v=1762457051"},{"product_id":"pro-pla-fire-engine-red-1-75mm","title":"Tough Pro PLA+, Fire Engine Red, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Fire Engine Red is a bright, classic red for parts and accessories that need to stand out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Fire Engine Red","offer_id":39755408343105,"sku":"A3504","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Fire Engine Red","offer_id":40172937707585,"sku":"A3704","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-fire-engine-red-175mm-458882.jpg?v=1762457054"},{"product_id":"pro-pla-daffodil-yellow-1-75mm","title":"Tough Pro PLA+, Daffodil Yellow, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Daffodil Yellow is a fresh, bright spring yellow. For a darker, richer yellow, see Harvest Gold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Daffodil Yellow","offer_id":39755407884353,"sku":"A3506","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Daffodil Yellow","offer_id":40172937314369,"sku":"A3706","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-daffodil-yellow-175mm-107829.jpg?v=1762457067"},{"product_id":"pro-pla-island-fuchsia-1-75mm","title":"Tough Pro PLA+, Island Fuchsia, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Island Fuchsia sits between magenta and purple, a shade some people call Barney purple. It makes prints pop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Island Fuchsia","offer_id":29441040941121,"sku":"A35E9","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Island Fuchsia","offer_id":40172938821697,"sku":"A37E9","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-island-fuchsia-175mm-528091.jpg?v=1762457069"},{"product_id":"pro-pla-iron-red-1-75mm","title":"Tough Pro PLA+, Iron Red, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Iron Red is a deep, dark, rust-like red. It suits armor, props and any project that calls for a darker red than Fire Engine Red.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Iron Red","offer_id":39755407687745,"sku":"A35A3","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Iron Red","offer_id":40172939018305,"sku":"A37A3","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-iron-red-175mm-282288.jpg?v=1762457071"},{"product_id":"pro-pla-filament-autumn-orange-1","title":"Tough Pro PLA+, Autumn Orange, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Autumn Orange is a burnt orange. Use it for fall and Halloween projects, pumpkins and any print that needs a darker orange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Autumn Orange","offer_id":39755407622209,"sku":"A35A5","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Autumn Orange","offer_id":40172936298561,"sku":"A37A5","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-autumn-orange-175mm-531826.jpg?v=1762457078"},{"product_id":"pro-pla-filament-chocolate-brown-1-75mm","title":"Tough Pro PLA+, Chocolate Brown, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Chocolate Brown is a rich, dark brown that looks just like real chocolate. Just don't try to eat it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Chocolate Brown","offer_id":39755407523905,"sku":"A35A1","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Chocolate Brown","offer_id":40172936888385,"sku":"A37A1","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-chocolate-brown-175mm-147421.jpg?v=1762457079"},{"product_id":"pro-pla-filament-brightest-white-1-75mm","title":"Tough Pro PLA+, Brightest White, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brightest White is the whitest of our whites, nearly blue-white and brighter than Snow White. Use it when you want a crisp, bright finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Brightest White","offer_id":39755407392833,"sku":"A35E3","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Brightest White","offer_id":40172936659009,"sku":"A37E3","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-brightest-white-175mm-715049.jpg?v=1762457082"},{"product_id":"pro-pla-filament-metallic-gold-1-75mm","title":"Tough Pro PLA+, Metallic Gold, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Gold has a metal-like gold sheen with no metal or abrasives in it. It suits trophies, props and decorative parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Metallic Gold","offer_id":39755407327297,"sku":"A35MG","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Metallic Gold","offer_id":40172939509825,"sku":"A37MG","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-metallic-gold-175mm-425462.jpg?v=1762457082"},{"product_id":"pro-pla-filament-metallic-copper-1-75mm","title":"Tough Pro PLA+, Metallic Copper, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Metallic Copper has a metal-like copper sheen with no metal or abrasives in it. It suits props, steampunk builds and decorative parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Metallic Copper","offer_id":39755407228993,"sku":"A35MC","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Metallic Copper","offer_id":40172939444289,"sku":"A37MC","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-metallic-copper-175mm-878550.jpg?v=1762457084"},{"product_id":"pro-pla-filament-bubblegum-pink-1-75mm","title":"Tough Pro PLA+, Bubblegum Pink, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Bubblegum Pink is a soft pastel pink for projects that call for a lighter, gentler color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Bubblegum Pink","offer_id":39755407163457,"sku":"A35P4","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Bubblegum Pink","offer_id":40172936495169,"sku":"A37P4","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-bubblegum-pink-175mm-968203.jpg?v=1762457084"},{"product_id":"pro-pla-filament-pistachio-green-1-75mm","title":"Tough Pro PLA+, Pistachio Green, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Pistachio Green is a light, minty green for springtime projects and for accenting darker greens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Pistachio Green","offer_id":39755407065153,"sku":"A35P7","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Pistachio Green","offer_id":40172940001345,"sku":"A37P7","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-pistachio-green-175mm-591876.jpg?v=1759251631"},{"product_id":"standard-pla-filament-grape-purple-1-75mm","title":"Standard PLA+, Grape Purple, 1.75mm","description":"\u003cp\u003eGrape Purple is a solid, saturated purple for any project that needs one.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Grape Purple","offer_id":39755419779137,"sku":"A1509","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Grape Purple","offer_id":40178750849089,"sku":"A1709","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-grape-purple-175mm-974151.jpg?v=1762457085"},{"product_id":"standard-pla-filament-chocolate-brown-1-75mm","title":"Standard PLA+, Chocolate Brown, 1.75mm","description":"\u003cp\u003eChocolate Brown is a rich, dark brown that looks just like actual chocolate. Just don't try to eat it.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Chocolate Brown","offer_id":39755419713601,"sku":"A15A1","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Chocolate Brown","offer_id":40178750718017,"sku":"A17A1","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-chocolate-brown-175mm-799693.jpg?v=1762457087"},{"product_id":"standard-pla-filament-castle-gray","title":"Standard PLA+, Castle Gray, 1.75mm","description":"\u003cp\u003eCastle Gray is made for stone and masonry with detailed shadows; it is darker than Industrial Gray and lighter than Charcoal Gray.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Castle Gray","offer_id":39789300777025,"sku":"A1522","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-castle-gray-175mm-207707.jpg?v=1762457087"},{"product_id":"standard-pla-filament-caribbean-blue-1-75mm","title":"Standard PLA+, Caribbean Blue, 1.75mm","description":"\u003cp\u003eCaribbean Blue is a bright teal-blue that brings projects to life.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Caribbean Blue","offer_id":39755419582529,"sku":"A1510","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Caribbean Blue","offer_id":40172940984385,"sku":"A1710","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-caribbean-blue-175mm-944996.jpg?v=1762457088"},{"product_id":"standard-pla-filament-brightest-white-1-75mm","title":"Standard PLA+, Brightest White, 1.75mm","description":"\u003cp\u003eThe whitest of our whites, Brightest White is nearly blue-white and brighter than Snow White.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Brightest White","offer_id":39755419516993,"sku":"A15E3","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Brightest White","offer_id":40172940918849,"sku":"A17E3","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-brightest-white-175mm-888687.jpg?v=1762457088"},{"product_id":"standard-pla-filament-metallic-copper-1-75mm","title":"Standard PLA+, Metallic Copper, 1.75mm","description":"\u003cp\u003eMetallic Copper gives a copper-like shimmer with no metal powder or abrasive fill, so it prints on a standard brass nozzle. It looks best on smooth, glossy surfaces; print a little slower or hotter for more shine.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Metallic Copper","offer_id":39755419451457,"sku":"A15MC","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Metallic Copper","offer_id":40178750947393,"sku":"A17MC","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-metallic-copper-175mm-713718.jpg?v=1762457090"},{"product_id":"standard-pla-filament-bubblegum-pink-1-75mm","title":"Standard PLA+, Bubblegum Pink, 1.75mm","description":"\u003cp\u003eBubblegum Pink is a soft pastel pink for projects that call for a gentler color.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Bubblegum Pink","offer_id":39755418927169,"sku":"A15P4","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Bubblegum Pink","offer_id":40178750685249,"sku":"A17P4","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-bubblegum-pink-175mm-692042.jpg?v=1762457091"},{"product_id":"standard-pla-filament-pistachio-green-1-75mm","title":"Standard PLA+, Pistachio Green, 1.75mm","description":"\u003cp\u003ePistachio Green is a light green for springtime projects, mint colors and accents beside darker greens.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Pistachio Green","offer_id":39755418763329,"sku":"A15P7","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Pistachio Green","offer_id":40178752979009,"sku":"A17P7","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-pistachio-green-175mm-299653.jpg?v=1762457091"},{"product_id":"pro-pla-filament-aquamarine","title":"Tough Pro PLA+, Aquamarine, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Aquamarine is a calm shade on the line between light blue and light green.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Aquamarine","offer_id":39755406966849,"sku":"A35P8","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Aquamarine","offer_id":40172936200257,"sku":"A37P8","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-aquamarine-175mm-102372.jpg?v=1762457094"},{"product_id":"pro-pla-filament-forest-green-1-75mm","title":"Tough Pro PLA+, Forest Green, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Forest Green is a deep pine green, a natural fit for trees and terrain or for matching your team's colors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Forest Green","offer_id":39755406901313,"sku":"A35A7","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Forest Green","offer_id":40172937838657,"sku":"A37A7","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-forest-green-175mm-687916.jpg?v=1762457094"},{"product_id":"standard-pla-filament-aquamarine-1-75mm","title":"Standard PLA+, Aquamarine, 1.75mm","description":"\u003cp\u003eAquamarine is a peaceful shade at the edge between light blue and light green.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Aquamarine","offer_id":39755418697793,"sku":"A15P8","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Aquamarine","offer_id":40178750652481,"sku":"A17P8","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-aquamarine-175mm-794966.jpg?v=1762457097"},{"product_id":"standard-pla-filament-lulzbot-green-1-75mm","title":"Standard PLA+, LulzBot® Green, 1.75mm","description":"\u003cp\u003eLulzBot® Green is a bright yellow-green, similar to Ryobi green, named for LulzBot®, one of the pioneers of open-source 3D printing.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ LulzBot Green","offer_id":39755417845825,"sku":"A15E7","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ LulzBot Green","offer_id":40178750914625,"sku":"A17E7","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-lulzbot-green-175mm-405703.jpg?v=1762457098"},{"product_id":"standard-pla-filament-warm-bisque-1-75mm","title":"Standard PLA+, Warm Bisque, 1.75mm","description":"\u003cp\u003eWarm Bisque is a light, warm skin tone for figures, busts and character models.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Warm Bisque","offer_id":39755417780289,"sku":"A15A4","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Warm Bisque","offer_id":40172943310913,"sku":"A17A4","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-warm-bisque-175mm-605110.jpg?v=1762457100"},{"product_id":"pro-pla-filament-cobalt-blue-1-75mm","title":"Tough Pro PLA+, Cobalt Blue, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Cobalt Blue is a deep blue with some translucency and depth, a little like machinable blue wax.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Cobalt Blue","offer_id":39755406704705,"sku":"A35A8","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Cobalt Blue","offer_id":40172936953921,"sku":"A37A8","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-cobalt-blue-175mm-431653.jpg?v=1762457100"},{"product_id":"pro-pla-filament-warm-bisque-1-75mm","title":"Tough Pro PLA+, Warm Bisque, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Warm Bisque is a warm, light skin tone, often used for figures, busts and cosplay pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Warm Bisque","offer_id":39755406639169,"sku":"A35A4","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Warm Bisque","offer_id":40172940263489,"sku":"A37A4","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-warm-bisque-175mm-270119.jpg?v=1762457101"},{"product_id":"standard-pla-filament-cobalt-blue-1-75mm","title":"Standard PLA+, Cobalt Blue, 1.75mm","description":"\u003cp\u003eCobalt Blue is a deep blue with some translucency and depth; it looks almost like machinable blue wax.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Cobalt Blue","offer_id":39755417714753,"sku":"A15A8","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Cobalt Blue","offer_id":40178750750785,"sku":"A17A8","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-cobalt-blue-175mm-275247.jpg?v=1762457101"},{"product_id":"standard-pla-filament-fjord-blue-1-75mm","title":"Standard PLA+, Fjord Blue, 1.75mm","description":"\u003cp\u003eOne of our CEO's personal favorites, Fjord Blue is a light, calming blue.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Fjord Blue","offer_id":39809356660801,"sku":"A1518","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Fjord Blue","offer_id":40178750783553,"sku":"A1718","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-fjord-blue-175mm-241653.jpg?v=1762457103"},{"product_id":"pro-pla-filament-almond-1-75mm","title":"Tough Pro PLA+, Almond, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Almond sits between Bone White and Desert Tan, good for desert-themed and earth-tone projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Almond","offer_id":39755402379329,"sku":"A3513","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Almond","offer_id":40172936134721,"sku":"A3713","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-almond-175mm-133750.jpg?v=1762457185"},{"product_id":"pro-pla-filament-glow-in-the-dark-1-75mm","title":"Tough Pro PLA+, Glow In The Dark, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Glow In The Dark charges under light and glows in the dark. It's slightly abrasive, so we recommend a hardened steel nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Glow In The Dark","offer_id":47883760664892,"sku":"A35G0","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Glow In The Dark","offer_id":40172938559553,"sku":"A37G0","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/tough-pro-pla-glow-in-the-dark-175mm-334070.jpg?v=1762457186"},{"product_id":"pro-pla-filament-fluorescent-orange-1-75mm","title":"Tough Pro PLA+, Fluorescent Orange, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Fluorescent Orange glows under UV (blacklight) and is a very bright orange in everyday light. It's a great fit for laser tag arenas and parts that need to be seen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Fluorescent Orange","offer_id":39566973730881,"sku":"A35F5","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Fluorescent Orange","offer_id":40172938068033,"sku":"A37F5","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-fluorescent-orange-175mm-719460.jpg?v=1762457186"},{"product_id":"pro-pla-filament-desert-tan-1-75mm","title":"Tough Pro PLA+, Desert Tan, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Desert Tan is a light sand tan, a staple for military models, airsoft and tactical accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Desert Tan","offer_id":39755402018881,"sku":"A3523","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Desert Tan","offer_id":40172937216065,"sku":"A3723","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-pla-desert-tan-175mm-169216.jpg?v=1762457190"},{"product_id":"pro-petg-1-75mm-lulzbot-green","title":"Pro PETG, LulzBot Green, 1.75mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eManufactured from 100% virgin PETG resin, LulzBot Green Pro PETG is a fantastic, economical 3D printing material.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePETG is a newer printing filament with the advantage of printing easily like PLA, but offering higher temp and impact resistance like ABS. Nearly ZERO warpage prints, extremely strong layer bonds, little to no odor at all. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRecommended Print Settings (settings will vary from printer to printer)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrint nozzle temp:\u003c\/strong\u003e 245 - 265C (Our PETG Prints a little hotter than some.)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHeated Bed temp:\u003c\/strong\u003e 70 - 80C\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"3D-Fuel Pro PETG SDS in PDF Format\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_PETG.pdf?v=1601481745\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload SDS for Pro PETG\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"3D-Fuel Pro PETG TDS in PDF\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D_Fuel_Pro_PETG_9-22-25.pdf?v=1758582495\"\u003eDownload TDS for Pro PETG\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eQuality:\u003c\/strong\u003e All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool. Learn more about 3D-Fuel filament quality.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDiameter Tolerance:\u003c\/strong\u003e Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePacking Information:\u003c\/strong\u003e A full 1kg (2.2lbs) of LulzBot Green Pro PETG plastic filament arrives on an easy-to-use, \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374-What-are-the-sizes-and-weights-of-your-spools\"\u003eAMS-compatible plastic spool\u003c\/a\u003e and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTest Printing:\u003c\/strong\u003e The 3D-Fuel test lab features multiple brands of 3D printers including MakerBot, LulzBot, FlashForge, and more. We 3D print what we manufacture to ensure that our filament provides the absolute best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PETG \/ 1kg 1.75mm Spool \/ LulzBot Green","offer_id":39765799370817,"sku":"E15E7","price":22.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/pro-petg-lulzbot-green-175mm-590601.webp?v=1759252240"},{"product_id":"standard-pla-1-75mm-fluorescent-orange","title":"Standard PLA+, Fluorescent Orange, 1.75mm","description":"\u003cp\u003eFluorescent Orange is a neon orange that glows brightest under UV (black) light, for laser-tag arenas, signage and high-visibility parts.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Fluorescent Orange","offer_id":48141605306684,"sku":"A15F5","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Fluorescent Orange","offer_id":39789300940865,"sku":"A17F5","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-fluorescent-orange-175mm-649213.jpg?v=1762457212"},{"product_id":"standard-pla-1-75mm-almond","title":"Standard PLA+, Almond, 1.75mm","description":"\u003cp\u003eAlmond sits between Bone White and Desert Tan: a soft beige for desert-themed models, terrain and earth-tone projects.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Almond","offer_id":39765800583233,"sku":"A1513","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-almond-175mm-118427.jpg?v=1762457212"},{"product_id":"standard-pla-1-75mm-desert-tan","title":"Standard PLA+, Desert Tan, 1.75mm","description":"\u003cp\u003eDesert Tan is a light sand tan for desert-themed models, terrain and tactical accessories.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Desert Tan","offer_id":39787454758977,"sku":"A1523","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-desert-tan-175mm-945383.jpg?v=1762457219"},{"product_id":"standard-pla-1-75mm-flat-dark-earth","title":"Standard PLA+, Flat Dark Earth, 1.75mm","description":"\u003cp\u003eFlat Dark Earth (FDE) is the tan-brown used on tactical gear, for airsoft parts, mounts and military models. FDE shades vary between brands, so check the hex code before matching.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Flat Dark Earth","offer_id":39787454922817,"sku":"A1521","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-flat-dark-earth-175mm-707184.jpg?v=1762457221"},{"product_id":"standard-pla-1-75mm-fluorescent-green","title":"Standard PLA+, Fluorescent Green, 1.75mm","description":"\u003cp\u003eFluorescent Green is a neon green that glows brightest under UV (black) light, for laser-tag arenas, signage and high-visibility parts.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Fluorescent Green","offer_id":39787455086657,"sku":"A15F7","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-fluorescent-green-175mm-176054.jpg?v=1762457222"},{"product_id":"standard-pla-1-75mm-glow-in-the-dark","title":"Standard PLA+, Glow in the Dark, 1.75mm","description":"\u003cp\u003eGlow in the Dark Standard PLA+ charges under light and glows on its own afterward. Strong UV light charges it fastest, and thicker walls glow longer. The glow pigment is abrasive, so print it with a hardened steel or other wear-resistant nozzle.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Glow in the Dark","offer_id":39787456528449,"sku":"A15G0","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-glow-in-the-dark-175mm-260536.jpg?v=1762457224"},{"product_id":"standard-pla-1-75mm-charcoal-gray","title":"Standard PLA+, Charcoal Gray, 1.75mm","description":"\u003cp\u003eCharcoal Gray is a dark, cool gray for projects where Midnight Black is too dark.\u003c\/p\u003e\n\u003ch2\u003eWhat makes it PLA+\u003c\/h2\u003e\n\u003cp\u003eStandard PLA+ is our everyday PLA, made in Fargo, North Dakota:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind\u003c\/li\u003e\n\u003cli\u003e±0.02 mm diameter, measured by multi-axis laser\u003c\/li\u003e\n\u003cli\u003eTuned for modern fast printers: 220-250 °C and up to 250 mm\/s\u003c\/li\u003e\n\u003cli\u003eAMS-compatible 1 kg spool and free print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed parts that take a hit? Step up to \u003ca href=\"\/collections\/tough-pla-filament\"\u003eTough Pro PLA+\u003c\/a\u003e. Printing for outdoors, hot cars or above 55 °C? Choose \u003ca href=\"\/collections\/1-75mm-pro-pctg\"\u003ePro PCTG\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePrint settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 220-250 °C. Start at 240 °C on fast printers and 230 °C on slower ones; a generic 200-215 °C PLA profile is too cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 0-60 °C (60 °C recommended) on smooth or textured PEI, Bambu Cool or High Temp Plate, glass, BuildTak or WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 60-250 mm\/s; above about 150 mm\/s, raise the temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part fan on; no enclosure needed (open the door or lid on enclosed printers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998455073943-Standard-PLA-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003eDownload Standard PLA+ print profiles\u003c\/a\u003e for Bambu Lab and Snapmaker U1 printers.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in the Bambu AMS?\u003c\/strong\u003e Yes. Our 1 kg spools have been AMS-compatible since October 2023.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hot can parts get?\u003c\/strong\u003e PLA softens around 55-60 °C, so keep parts out of hot cars and direct sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as supports for Pro PCTG?\u003c\/strong\u003e Yes, as a breakaway interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10\/2011 as supplied. A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it keep?\u003c\/strong\u003e Years, sealed and dry. Every spool ships vacuum-sealed with desiccant.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_StandardPLA.pdf\"\u003eSafety data sheet (SDS)\u003c\/a\u003e · \u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\" rel=\"noopener\"\u003eColor hex code library\u003c\/a\u003e\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Standard PLA+ \/ 1kg 1.75mm Spool \/ Charcoal Gray","offer_id":39789301825601,"sku":"A15A2","price":20.66,"currency_code":"USD","in_stock":true},{"title":"Standard PLA+ \/ 4kg 1.75mm Spool \/ Charcoal Gray","offer_id":40172941148225,"sku":"A17A2","price":84.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/products\/standard-pla-charcoal-gray-175mm-272134.jpg?v=1762457227"},{"product_id":"pro-pctg-bubblegum-pink-1-75mm","title":"Pro PCTG, Bubblegum Pink, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e3D-Fuel \u003cstrong\u003ePro PCTG is like PETG but better\u003c\/strong\u003e in many ways. It is \u003cstrong\u003etougher\u003c\/strong\u003e (8-12x the impact toughness of PETG, notched Izod), more \u003cstrong\u003echemically resistant\u003c\/strong\u003e, and its transparent colors print exceptionally clear. Pro PCTG is an easy-to-use material with a \u003cstrong\u003elower moisture absorption rate\u003c\/strong\u003e than PETG and doesn't require an enclosure - use it just like PETG.\u003c\/p\u003e\n\u003cp\u003eThe broad color selection and ease of printing make it an ideal choice for printing in a multi-color 3D printing system like the Bambu Lab AMS.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Profiles\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\" title=\"3D-Fuel Pro PCTG print profiles\" rel=\"noopener\" target=\"_blank\"\u003ePrint profiles for Pro PCTG on the Bambu Lab printers are available here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBambu AMS Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePro PCTG ships on a Bambu AMS-compatible spool (tested in the AMS, AMS 2 Pro and AMS HT). Select the \"PCTG Pro\" profile so the AMS recognizes the material. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSpool sizes and weights\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro PCTG Has 8-12x the Impact Toughness of PETG (Notched Izod)\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eKey Reasons for Better Impact Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG contains \u003cstrong\u003ecyclohexane dimethanol (CHDM)\u003c\/strong\u003e, which gives it increased flexibility and toughness compared to PETG’s ethylene glycol structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility vs. Brittleness\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG is more ductile, allowing it to absorb and dissipate energy during impact without cracking or shattering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Adhesion\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG has better inter-layer bonding when 3D printed, reducing weak points in the structure where impact forces might cause failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eReal-World Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Resistance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG parts are less likely to crack, chip, or break when dropped, making it ideal for high-impact applications like enclosures or wearable devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeated Stress\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG can endure repeated bending or sudden forces better than PETG, making it more suitable for hinges, clips, and flexible parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability in Extreme Conditions\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG resists embrittlement under low temperatures, maintaining its toughness in environments where PETG may fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eExample Use Cases Benefiting from PCTG's Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtective housings for electronics or tools.\u003c\/li\u003e\n\u003cli\u003eDrone parts and propeller guards.\u003c\/li\u003e\n\u003cli\u003eFlexible clips, snap-fits, and living hinges.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant containers or enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"table-container\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChemical Type\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003ePCTG Advantage\u003c\/th\u003e\n\u003cth\u003ePETG Limitation\u003c\/th\u003e\n\u003cth\u003eComparison (CRR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcohols\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol (IPA), ethanol, methanol\u003c\/td\u003e\n\u003ctd\u003eResists prolonged exposure without degrading or cracking.\u003c\/td\u003e\n\u003ctd\u003eDegrades or stress cracks with high alcohol concentrations over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrocarbons\u003c\/td\u003e\n\u003ctd\u003eHexane, heptane, gasoline, mineral spirits\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to hydrocarbon-based solvents.\u003c\/td\u003e\n\u003ctd\u003eSoftens or weakens when exposed to hydrocarbons.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcids\u003c\/td\u003e\n\u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n\u003ctd\u003eMaintains structural integrity in mild to moderately concentrated acids.\u003c\/td\u003e\n\u003ctd\u003eDegrades faster in acidic environments at higher concentrations.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBases (Alkalis)\u003c\/td\u003e\n\u003ctd\u003eSodium hydroxide, potassium hydroxide, ammonium hydroxide\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to strong alkalis.\u003c\/td\u003e\n\u003ctd\u003eMay crack or degrade when exposed to strong bases.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Agents\u003c\/td\u003e\n\u003ctd\u003eBleach (sodium hypochlorite), industrial degreasers, detergent solutions\u003c\/td\u003e\n\u003ctd\u003eWithstands harsh cleaning agents without discoloration or damage.\u003c\/td\u003e\n\u003ctd\u003eDiscolors, cracks, or loses properties with harsh cleaning agents over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils and Lubricants\u003c\/td\u003e\n\u003ctd\u003eEngine oils, hydraulic fluids, cutting oils\u003c\/td\u003e\n\u003ctd\u003eResists degradation from prolonged exposure to oils.\u003c\/td\u003e\n\u003ctd\u003eAbsorbs oils over time, potentially leading to swelling or weakening.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKetones\u003c\/td\u003e\n\u003ctd\u003eAcetone, methyl ethyl ketone (MEK)\u003c\/td\u003e\n\u003ctd\u003ePerforms slightly better in low-concentration ketones.\u003c\/td\u003e\n\u003ctd\u003eSoftens or dissolves more readily in ketone-rich environments.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePro PCTG Has Lower Moisture Absorption Than PETG\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHygroscopic\u003c\/strong\u003e: PETG absorbs moisture from the air, but at a relatively low rate compared to more hygroscopic materials like nylon or TPU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Absorption Rate\u003c\/strong\u003e: Approximately \u003cstrong\u003e0.2-0.3%\u003c\/strong\u003e by weight after prolonged exposure to humid environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eDuring printing, moisture in PETG can lead to stringing, bubbling, and surface defects due to water vaporizing in the hotend.\u003c\/li\u003e\n\u003cli\u003eMechanical properties (like impact strength) can slightly degrade over time with prolonged exposure to high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePCTG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlightly Lower Moisture Absorption\u003c\/strong\u003e: PCTG absorbs less moisture than PETG, typically around \u003cstrong\u003e0.1-0.2%\u003c\/strong\u003e by weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Resistance\u003c\/strong\u003e: Due to its cyclohexane dimethanol (CHDM) component, PCTG’s molecular structure makes it less hygroscopic and more resistant to moisture-induced degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG generally performs better than PETG in humid conditions, retaining clarity, toughness, and dimensional stability for longer periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy the Difference?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePETG’s glycol modification increases flexibility but leaves the material slightly more hygroscopic.\u003c\/li\u003e\n\u003cli\u003ePCTG’s modified structure with CHDM reduces the polar sites available for moisture interaction, resulting in less absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePractical Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e3D Printing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG\u003c\/strong\u003e: Requires drying more frequently, especially if exposed to humid environments, as even slight moisture absorption can lead to print defects (bubbling, stringing, poor adhesion).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG\u003c\/strong\u003e: Requires less frequent drying, making it easier to handle in environments with higher humidity. It is also more forgiving if printed without drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoth materials benefit from being stored in airtight containers with desiccant.\u003c\/li\u003e\n\u003cli\u003ePCTG will be less prone to degradation if exposed to moisture for extended periods compared to PETG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Use in Humid Environments\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG is more stable\u003c\/strong\u003e and less likely to lose mechanical properties over time in high-humidity settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003eFor both materials, drying before printing and proper storage is recommended for optimal performance, but \u003cstrong\u003ePCTG is less maintenance-intensive\u003c\/strong\u003e in this regard.\u003c\/p\u003e\n\u003cp\u003eWhen you need to dry Pro PCTG, use 70C for 6-8 hours, or 65C for 8-12 hours if your dryer cannot reach 70C. If your dryer has no PCTG preset, use the PETG preset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in more than 40 colors\u003c\/strong\u003e, including transparent, translucent, metallic, fluorescent and Toolbox colors. \u003ca href=\"https:\/\/www.3dfuel.com\/collections\/1-75mm-pro-pctg\" title=\"All Pro PCTG colors\"\u003eSee all Pro PCTG colors.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePrint Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 250-280C (hotter for faster prints, thicker layers and hardened nozzles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e 80C on clean textured PEI, no glue. Raise 5C at a time for warping on large parts; 85-90C is fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Textured PEI. Avoid bare smooth PEI (Pro PCTG can damage it); use a glue stick as a release layer on smooth sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Cooling:\u003c\/strong\u003e 5-40%, at least half of your PETG setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e Nothing above 150 mm\/s; outer walls and top surfaces 100 mm\/s or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Volumetric Speed:\u003c\/strong\u003e 10-15 mm³\/s on a 0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance:\u003c\/strong\u003e Calibrate for Pro PCTG. Do not reuse a PETG value; this is the single biggest factor in clean prints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required. If you have one, keep it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1787915348\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG TDS\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1787908538\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG SDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in the United States. We have complete control over the manufacturing process and can ensure consistent quality for every spool. \u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel filament quality\" rel=\"noopener\" target=\"_blank\"\u003eLearn more about 3D-Fuel filament quality.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eVariable 3D filament diameters can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eEvery spool of Pro PCTG arrives on a durable plastic reel compatible with the Bambu Lab AMS, vacuum-sealed with a desiccant packet to keep out moisture. Spool sizes are net filament weight. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSee spool sizes and weights.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more. We use what we manufacture in our 3D printing operations to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG \/ 1kg 1.75mm Spool \/ Bubblegum Pink","offer_id":49566399889724,"sku":"E45P4","price":26.06,"currency_code":"USD","in_stock":true},{"title":"Pro PCTG \/ 4kg 1.75mm Spool \/ Bubblegum Pink","offer_id":49566399922492,"sku":"E47P4","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/ProPCTG-BubblegumPink-E45P4-polarized.jpg?v=1775329164"},{"product_id":"pro-pctg-caribbean-blue-1-75mm","title":"Pro PCTG, Caribbean Blue, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e3D-Fuel \u003cstrong\u003ePro PCTG is like PETG but better\u003c\/strong\u003e in many ways. It is \u003cstrong\u003etougher\u003c\/strong\u003e (8-12x the impact toughness of PETG, notched Izod), more \u003cstrong\u003echemically resistant\u003c\/strong\u003e, and its transparent colors print exceptionally clear. Pro PCTG is an easy-to-use material with a \u003cstrong\u003elower moisture absorption rate\u003c\/strong\u003e than PETG and doesn't require an enclosure - use it just like PETG.\u003c\/p\u003e\n\u003cp\u003eThe broad color selection and ease of printing make it an ideal choice for printing in a multi-color 3D printing system like the Bambu Lab AMS.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Profiles\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\" title=\"3D-Fuel Pro PCTG print profiles\" rel=\"noopener\" target=\"_blank\"\u003ePrint profiles for Pro PCTG on the Bambu Lab printers are available here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBambu AMS Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePro PCTG ships on a Bambu AMS-compatible spool (tested in the AMS, AMS 2 Pro and AMS HT). Select the \"PCTG Pro\" profile so the AMS recognizes the material. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSpool sizes and weights\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro PCTG Has 8-12x the Impact Toughness of PETG (Notched Izod)\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eKey Reasons for Better Impact Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG contains \u003cstrong\u003ecyclohexane dimethanol (CHDM)\u003c\/strong\u003e, which gives it increased flexibility and toughness compared to PETG’s ethylene glycol structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility vs. Brittleness\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG is more ductile, allowing it to absorb and dissipate energy during impact without cracking or shattering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Adhesion\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG has better inter-layer bonding when 3D printed, reducing weak points in the structure where impact forces might cause failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eReal-World Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Resistance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG parts are less likely to crack, chip, or break when dropped, making it ideal for high-impact applications like enclosures or wearable devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeated Stress\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG can endure repeated bending or sudden forces better than PETG, making it more suitable for hinges, clips, and flexible parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability in Extreme Conditions\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG resists embrittlement under low temperatures, maintaining its toughness in environments where PETG may fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eExample Use Cases Benefiting from PCTG's Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtective housings for electronics or tools.\u003c\/li\u003e\n\u003cli\u003eDrone parts and propeller guards.\u003c\/li\u003e\n\u003cli\u003eFlexible clips, snap-fits, and living hinges.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant containers or enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"table-container\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChemical Type\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003ePCTG Advantage\u003c\/th\u003e\n\u003cth\u003ePETG Limitation\u003c\/th\u003e\n\u003cth\u003eComparison (CRR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcohols\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol (IPA), ethanol, methanol\u003c\/td\u003e\n\u003ctd\u003eResists prolonged exposure without degrading or cracking.\u003c\/td\u003e\n\u003ctd\u003eDegrades or stress cracks with high alcohol concentrations over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrocarbons\u003c\/td\u003e\n\u003ctd\u003eHexane, heptane, gasoline, mineral spirits\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to hydrocarbon-based solvents.\u003c\/td\u003e\n\u003ctd\u003eSoftens or weakens when exposed to hydrocarbons.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcids\u003c\/td\u003e\n\u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n\u003ctd\u003eMaintains structural integrity in mild to moderately concentrated acids.\u003c\/td\u003e\n\u003ctd\u003eDegrades faster in acidic environments at higher concentrations.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBases (Alkalis)\u003c\/td\u003e\n\u003ctd\u003eSodium hydroxide, potassium hydroxide, ammonium hydroxide\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to strong alkalis.\u003c\/td\u003e\n\u003ctd\u003eMay crack or degrade when exposed to strong bases.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Agents\u003c\/td\u003e\n\u003ctd\u003eBleach (sodium hypochlorite), industrial degreasers, detergent solutions\u003c\/td\u003e\n\u003ctd\u003eWithstands harsh cleaning agents without discoloration or damage.\u003c\/td\u003e\n\u003ctd\u003eDiscolors, cracks, or loses properties with harsh cleaning agents over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils and Lubricants\u003c\/td\u003e\n\u003ctd\u003eEngine oils, hydraulic fluids, cutting oils\u003c\/td\u003e\n\u003ctd\u003eResists degradation from prolonged exposure to oils.\u003c\/td\u003e\n\u003ctd\u003eAbsorbs oils over time, potentially leading to swelling or weakening.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKetones\u003c\/td\u003e\n\u003ctd\u003eAcetone, methyl ethyl ketone (MEK)\u003c\/td\u003e\n\u003ctd\u003ePerforms slightly better in low-concentration ketones.\u003c\/td\u003e\n\u003ctd\u003eSoftens or dissolves more readily in ketone-rich environments.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePro PCTG Has Lower Moisture Absorption Than PETG\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHygroscopic\u003c\/strong\u003e: PETG absorbs moisture from the air, but at a relatively low rate compared to more hygroscopic materials like nylon or TPU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Absorption Rate\u003c\/strong\u003e: Approximately \u003cstrong\u003e0.2-0.3%\u003c\/strong\u003e by weight after prolonged exposure to humid environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eDuring printing, moisture in PETG can lead to stringing, bubbling, and surface defects due to water vaporizing in the hotend.\u003c\/li\u003e\n\u003cli\u003eMechanical properties (like impact strength) can slightly degrade over time with prolonged exposure to high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePCTG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlightly Lower Moisture Absorption\u003c\/strong\u003e: PCTG absorbs less moisture than PETG, typically around \u003cstrong\u003e0.1-0.2%\u003c\/strong\u003e by weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Resistance\u003c\/strong\u003e: Due to its cyclohexane dimethanol (CHDM) component, PCTG’s molecular structure makes it less hygroscopic and more resistant to moisture-induced degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG generally performs better than PETG in humid conditions, retaining clarity, toughness, and dimensional stability for longer periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy the Difference?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePETG’s glycol modification increases flexibility but leaves the material slightly more hygroscopic.\u003c\/li\u003e\n\u003cli\u003ePCTG’s modified structure with CHDM reduces the polar sites available for moisture interaction, resulting in less absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePractical Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e3D Printing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG\u003c\/strong\u003e: Requires drying more frequently, especially if exposed to humid environments, as even slight moisture absorption can lead to print defects (bubbling, stringing, poor adhesion).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG\u003c\/strong\u003e: Requires less frequent drying, making it easier to handle in environments with higher humidity. It is also more forgiving if printed without drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoth materials benefit from being stored in airtight containers with desiccant.\u003c\/li\u003e\n\u003cli\u003ePCTG will be less prone to degradation if exposed to moisture for extended periods compared to PETG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Use in Humid Environments\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG is more stable\u003c\/strong\u003e and less likely to lose mechanical properties over time in high-humidity settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003eFor both materials, drying before printing and proper storage is recommended for optimal performance, but \u003cstrong\u003ePCTG is less maintenance-intensive\u003c\/strong\u003e in this regard.\u003c\/p\u003e\n\u003cp\u003eWhen you need to dry Pro PCTG, use 70C for 6-8 hours, or 65C for 8-12 hours if your dryer cannot reach 70C. If your dryer has no PCTG preset, use the PETG preset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in more than 40 colors\u003c\/strong\u003e, including transparent, translucent, metallic, fluorescent and Toolbox colors. \u003ca href=\"https:\/\/www.3dfuel.com\/collections\/1-75mm-pro-pctg\" title=\"All Pro PCTG colors\"\u003eSee all Pro PCTG colors.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePrint Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 250-280C (hotter for faster prints, thicker layers and hardened nozzles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e 80C on clean textured PEI, no glue. Raise 5C at a time for warping on large parts; 85-90C is fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Textured PEI. Avoid bare smooth PEI (Pro PCTG can damage it); use a glue stick as a release layer on smooth sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Cooling:\u003c\/strong\u003e 5-40%, at least half of your PETG setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e Nothing above 150 mm\/s; outer walls and top surfaces 100 mm\/s or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Volumetric Speed:\u003c\/strong\u003e 10-15 mm³\/s on a 0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance:\u003c\/strong\u003e Calibrate for Pro PCTG. Do not reuse a PETG value; this is the single biggest factor in clean prints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required. If you have one, keep it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1787915348\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG TDS\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1787908538\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG SDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in the United States. We have complete control over the manufacturing process and can ensure consistent quality for every spool. \u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel filament quality\" rel=\"noopener\" target=\"_blank\"\u003eLearn more about 3D-Fuel filament quality.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eVariable 3D filament diameters can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eEvery spool of Pro PCTG arrives on a durable plastic reel compatible with the Bambu Lab AMS, vacuum-sealed with a desiccant packet to keep out moisture. Spool sizes are net filament weight. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSee spool sizes and weights.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more. We use what we manufacture in our 3D printing operations to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG \/ 1kg 1.75mm Spool \/ Caribbean Blue","offer_id":51823694151996,"sku":"E4510","price":26.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/pro-pctg-caribbean-blue-175mm-449746.jpg?v=1762459935"},{"product_id":"pro-pctg-aquamarine-1-75mm","title":"Pro PCTG, Aquamarine Blue, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e3D-Fuel \u003cstrong\u003ePro PCTG is like PETG but better\u003c\/strong\u003e in many ways. It is \u003cstrong\u003etougher\u003c\/strong\u003e (8-12x the impact toughness of PETG, notched Izod), more \u003cstrong\u003echemically resistant\u003c\/strong\u003e, and its transparent colors print exceptionally clear. Pro PCTG is an easy-to-use material with a \u003cstrong\u003elower moisture absorption rate\u003c\/strong\u003e than PETG and doesn't require an enclosure - use it just like PETG.\u003c\/p\u003e\n\u003cp\u003eThe broad color selection and ease of printing make it an ideal choice for printing in a multi-color 3D printing system like the Bambu Lab AMS.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Profiles\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\" title=\"3D-Fuel Pro PCTG print profiles\" rel=\"noopener\" target=\"_blank\"\u003ePrint profiles for Pro PCTG on the Bambu Lab printers are available here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBambu AMS Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePro PCTG ships on a Bambu AMS-compatible spool (tested in the AMS, AMS 2 Pro and AMS HT). Select the \"PCTG Pro\" profile so the AMS recognizes the material. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSpool sizes and weights\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro PCTG Has 8-12x the Impact Toughness of PETG (Notched Izod)\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eKey Reasons for Better Impact Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG contains \u003cstrong\u003ecyclohexane dimethanol (CHDM)\u003c\/strong\u003e, which gives it increased flexibility and toughness compared to PETG’s ethylene glycol structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility vs. Brittleness\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG is more ductile, allowing it to absorb and dissipate energy during impact without cracking or shattering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Adhesion\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG has better inter-layer bonding when 3D printed, reducing weak points in the structure where impact forces might cause failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eReal-World Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Resistance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG parts are less likely to crack, chip, or break when dropped, making it ideal for high-impact applications like enclosures or wearable devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeated Stress\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG can endure repeated bending or sudden forces better than PETG, making it more suitable for hinges, clips, and flexible parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability in Extreme Conditions\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG resists embrittlement under low temperatures, maintaining its toughness in environments where PETG may fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eExample Use Cases Benefiting from PCTG's Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtective housings for electronics or tools.\u003c\/li\u003e\n\u003cli\u003eDrone parts and propeller guards.\u003c\/li\u003e\n\u003cli\u003eFlexible clips, snap-fits, and living hinges.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant containers or enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"table-container\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChemical Type\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003ePCTG Advantage\u003c\/th\u003e\n\u003cth\u003ePETG Limitation\u003c\/th\u003e\n\u003cth\u003eComparison (CRR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcohols\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol (IPA), ethanol, methanol\u003c\/td\u003e\n\u003ctd\u003eResists prolonged exposure without degrading or cracking.\u003c\/td\u003e\n\u003ctd\u003eDegrades or stress cracks with high alcohol concentrations over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrocarbons\u003c\/td\u003e\n\u003ctd\u003eHexane, heptane, gasoline, mineral spirits\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to hydrocarbon-based solvents.\u003c\/td\u003e\n\u003ctd\u003eSoftens or weakens when exposed to hydrocarbons.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcids\u003c\/td\u003e\n\u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n\u003ctd\u003eMaintains structural integrity in mild to moderately concentrated acids.\u003c\/td\u003e\n\u003ctd\u003eDegrades faster in acidic environments at higher concentrations.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBases (Alkalis)\u003c\/td\u003e\n\u003ctd\u003eSodium hydroxide, potassium hydroxide, ammonium hydroxide\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to strong alkalis.\u003c\/td\u003e\n\u003ctd\u003eMay crack or degrade when exposed to strong bases.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Agents\u003c\/td\u003e\n\u003ctd\u003eBleach (sodium hypochlorite), industrial degreasers, detergent solutions\u003c\/td\u003e\n\u003ctd\u003eWithstands harsh cleaning agents without discoloration or damage.\u003c\/td\u003e\n\u003ctd\u003eDiscolors, cracks, or loses properties with harsh cleaning agents over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils and Lubricants\u003c\/td\u003e\n\u003ctd\u003eEngine oils, hydraulic fluids, cutting oils\u003c\/td\u003e\n\u003ctd\u003eResists degradation from prolonged exposure to oils.\u003c\/td\u003e\n\u003ctd\u003eAbsorbs oils over time, potentially leading to swelling or weakening.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKetones\u003c\/td\u003e\n\u003ctd\u003eAcetone, methyl ethyl ketone (MEK)\u003c\/td\u003e\n\u003ctd\u003ePerforms slightly better in low-concentration ketones.\u003c\/td\u003e\n\u003ctd\u003eSoftens or dissolves more readily in ketone-rich environments.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePro PCTG Has Lower Moisture Absorption Than PETG\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHygroscopic\u003c\/strong\u003e: PETG absorbs moisture from the air, but at a relatively low rate compared to more hygroscopic materials like nylon or TPU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Absorption Rate\u003c\/strong\u003e: Approximately \u003cstrong\u003e0.2-0.3%\u003c\/strong\u003e by weight after prolonged exposure to humid environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eDuring printing, moisture in PETG can lead to stringing, bubbling, and surface defects due to water vaporizing in the hotend.\u003c\/li\u003e\n\u003cli\u003eMechanical properties (like impact strength) can slightly degrade over time with prolonged exposure to high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePCTG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlightly Lower Moisture Absorption\u003c\/strong\u003e: PCTG absorbs less moisture than PETG, typically around \u003cstrong\u003e0.1-0.2%\u003c\/strong\u003e by weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Resistance\u003c\/strong\u003e: Due to its cyclohexane dimethanol (CHDM) component, PCTG’s molecular structure makes it less hygroscopic and more resistant to moisture-induced degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG generally performs better than PETG in humid conditions, retaining clarity, toughness, and dimensional stability for longer periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy the Difference?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePETG’s glycol modification increases flexibility but leaves the material slightly more hygroscopic.\u003c\/li\u003e\n\u003cli\u003ePCTG’s modified structure with CHDM reduces the polar sites available for moisture interaction, resulting in less absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePractical Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e3D Printing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG\u003c\/strong\u003e: Requires drying more frequently, especially if exposed to humid environments, as even slight moisture absorption can lead to print defects (bubbling, stringing, poor adhesion).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG\u003c\/strong\u003e: Requires less frequent drying, making it easier to handle in environments with higher humidity. It is also more forgiving if printed without drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoth materials benefit from being stored in airtight containers with desiccant.\u003c\/li\u003e\n\u003cli\u003ePCTG will be less prone to degradation if exposed to moisture for extended periods compared to PETG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Use in Humid Environments\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG is more stable\u003c\/strong\u003e and less likely to lose mechanical properties over time in high-humidity settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003eFor both materials, drying before printing and proper storage is recommended for optimal performance, but \u003cstrong\u003ePCTG is less maintenance-intensive\u003c\/strong\u003e in this regard.\u003c\/p\u003e\n\u003cp\u003eWhen you need to dry Pro PCTG, use 70C for 6-8 hours, or 65C for 8-12 hours if your dryer cannot reach 70C. If your dryer has no PCTG preset, use the PETG preset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in more than 40 colors\u003c\/strong\u003e, including transparent, translucent, metallic, fluorescent and Toolbox colors. \u003ca href=\"https:\/\/www.3dfuel.com\/collections\/1-75mm-pro-pctg\" title=\"All Pro PCTG colors\"\u003eSee all Pro PCTG colors.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePrint Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 250-280C (hotter for faster prints, thicker layers and hardened nozzles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e 80C on clean textured PEI, no glue. Raise 5C at a time for warping on large parts; 85-90C is fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Textured PEI. Avoid bare smooth PEI (Pro PCTG can damage it); use a glue stick as a release layer on smooth sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Cooling:\u003c\/strong\u003e 5-40%, at least half of your PETG setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e Nothing above 150 mm\/s; outer walls and top surfaces 100 mm\/s or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Volumetric Speed:\u003c\/strong\u003e 10-15 mm³\/s on a 0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance:\u003c\/strong\u003e Calibrate for Pro PCTG. Do not reuse a PETG value; this is the single biggest factor in clean prints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required. If you have one, keep it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1787915348\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG TDS\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1787908538\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG SDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in the United States. We have complete control over the manufacturing process and can ensure consistent quality for every spool. \u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel filament quality\" rel=\"noopener\" target=\"_blank\"\u003eLearn more about 3D-Fuel filament quality.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eVariable 3D filament diameters can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eEvery spool of Pro PCTG arrives on a durable plastic reel compatible with the Bambu Lab AMS, vacuum-sealed with a desiccant packet to keep out moisture. Spool sizes are net filament weight. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSee spool sizes and weights.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more. We use what we manufacture in our 3D printing operations to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG \/ 1kg 1.75mm Spool \/ Aquamarine Blue","offer_id":51826643665212,"sku":"E45P8","price":26.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/pro-pctg-aquamarine-blue-175mm-591912.jpg?v=1762459942"},{"product_id":"pro-pctg-toolbox-blue-1-75mm","title":"Pro PCTG, Toolbox Blue, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e3D-Fuel \u003cstrong\u003ePro PCTG is like PETG but better\u003c\/strong\u003e in many ways. It is \u003cstrong\u003etougher\u003c\/strong\u003e (8-12x the impact toughness of PETG, notched Izod), more \u003cstrong\u003echemically resistant\u003c\/strong\u003e, and its transparent colors print exceptionally clear. Pro PCTG is an easy-to-use material with a \u003cstrong\u003elower moisture absorption rate\u003c\/strong\u003e than PETG and doesn't require an enclosure - use it just like PETG.\u003c\/p\u003e\n\u003cp\u003eThe broad color selection and ease of printing make it an ideal choice for printing in a multi-color 3D printing system like the Bambu Lab AMS.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Profiles\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\" title=\"3D-Fuel Pro PCTG print profiles\" rel=\"noopener\" target=\"_blank\"\u003ePrint profiles for Pro PCTG on the Bambu Lab printers are available here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBambu AMS Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePro PCTG ships on a Bambu AMS-compatible spool (tested in the AMS, AMS 2 Pro and AMS HT). Select the \"PCTG Pro\" profile so the AMS recognizes the material. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSpool sizes and weights\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro PCTG Has 8-12x the Impact Toughness of PETG (Notched Izod)\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eKey Reasons for Better Impact Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG contains \u003cstrong\u003ecyclohexane dimethanol (CHDM)\u003c\/strong\u003e, which gives it increased flexibility and toughness compared to PETG’s ethylene glycol structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility vs. Brittleness\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG is more ductile, allowing it to absorb and dissipate energy during impact without cracking or shattering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Adhesion\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG has better inter-layer bonding when 3D printed, reducing weak points in the structure where impact forces might cause failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eReal-World Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Resistance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG parts are less likely to crack, chip, or break when dropped, making it ideal for high-impact applications like enclosures or wearable devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeated Stress\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG can endure repeated bending or sudden forces better than PETG, making it more suitable for hinges, clips, and flexible parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability in Extreme Conditions\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG resists embrittlement under low temperatures, maintaining its toughness in environments where PETG may fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eExample Use Cases Benefiting from PCTG's Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtective housings for electronics or tools.\u003c\/li\u003e\n\u003cli\u003eDrone parts and propeller guards.\u003c\/li\u003e\n\u003cli\u003eFlexible clips, snap-fits, and living hinges.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant containers or enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"table-container\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChemical Type\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003ePCTG Advantage\u003c\/th\u003e\n\u003cth\u003ePETG Limitation\u003c\/th\u003e\n\u003cth\u003eComparison (CRR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcohols\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol (IPA), ethanol, methanol\u003c\/td\u003e\n\u003ctd\u003eResists prolonged exposure without degrading or cracking.\u003c\/td\u003e\n\u003ctd\u003eDegrades or stress cracks with high alcohol concentrations over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrocarbons\u003c\/td\u003e\n\u003ctd\u003eHexane, heptane, gasoline, mineral spirits\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to hydrocarbon-based solvents.\u003c\/td\u003e\n\u003ctd\u003eSoftens or weakens when exposed to hydrocarbons.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcids\u003c\/td\u003e\n\u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n\u003ctd\u003eMaintains structural integrity in mild to moderately concentrated acids.\u003c\/td\u003e\n\u003ctd\u003eDegrades faster in acidic environments at higher concentrations.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBases (Alkalis)\u003c\/td\u003e\n\u003ctd\u003eSodium hydroxide, potassium hydroxide, ammonium hydroxide\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to strong alkalis.\u003c\/td\u003e\n\u003ctd\u003eMay crack or degrade when exposed to strong bases.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Agents\u003c\/td\u003e\n\u003ctd\u003eBleach (sodium hypochlorite), industrial degreasers, detergent solutions\u003c\/td\u003e\n\u003ctd\u003eWithstands harsh cleaning agents without discoloration or damage.\u003c\/td\u003e\n\u003ctd\u003eDiscolors, cracks, or loses properties with harsh cleaning agents over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils and Lubricants\u003c\/td\u003e\n\u003ctd\u003eEngine oils, hydraulic fluids, cutting oils\u003c\/td\u003e\n\u003ctd\u003eResists degradation from prolonged exposure to oils.\u003c\/td\u003e\n\u003ctd\u003eAbsorbs oils over time, potentially leading to swelling or weakening.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKetones\u003c\/td\u003e\n\u003ctd\u003eAcetone, methyl ethyl ketone (MEK)\u003c\/td\u003e\n\u003ctd\u003ePerforms slightly better in low-concentration ketones.\u003c\/td\u003e\n\u003ctd\u003eSoftens or dissolves more readily in ketone-rich environments.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePro PCTG Has Lower Moisture Absorption Than PETG\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHygroscopic\u003c\/strong\u003e: PETG absorbs moisture from the air, but at a relatively low rate compared to more hygroscopic materials like nylon or TPU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Absorption Rate\u003c\/strong\u003e: Approximately \u003cstrong\u003e0.2-0.3%\u003c\/strong\u003e by weight after prolonged exposure to humid environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eDuring printing, moisture in PETG can lead to stringing, bubbling, and surface defects due to water vaporizing in the hotend.\u003c\/li\u003e\n\u003cli\u003eMechanical properties (like impact strength) can slightly degrade over time with prolonged exposure to high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePCTG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlightly Lower Moisture Absorption\u003c\/strong\u003e: PCTG absorbs less moisture than PETG, typically around \u003cstrong\u003e0.1-0.2%\u003c\/strong\u003e by weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Resistance\u003c\/strong\u003e: Due to its cyclohexane dimethanol (CHDM) component, PCTG’s molecular structure makes it less hygroscopic and more resistant to moisture-induced degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG generally performs better than PETG in humid conditions, retaining clarity, toughness, and dimensional stability for longer periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy the Difference?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePETG’s glycol modification increases flexibility but leaves the material slightly more hygroscopic.\u003c\/li\u003e\n\u003cli\u003ePCTG’s modified structure with CHDM reduces the polar sites available for moisture interaction, resulting in less absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePractical Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e3D Printing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG\u003c\/strong\u003e: Requires drying more frequently, especially if exposed to humid environments, as even slight moisture absorption can lead to print defects (bubbling, stringing, poor adhesion).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG\u003c\/strong\u003e: Requires less frequent drying, making it easier to handle in environments with higher humidity. It is also more forgiving if printed without drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoth materials benefit from being stored in airtight containers with desiccant.\u003c\/li\u003e\n\u003cli\u003ePCTG will be less prone to degradation if exposed to moisture for extended periods compared to PETG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Use in Humid Environments\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG is more stable\u003c\/strong\u003e and less likely to lose mechanical properties over time in high-humidity settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003eFor both materials, drying before printing and proper storage is recommended for optimal performance, but \u003cstrong\u003ePCTG is less maintenance-intensive\u003c\/strong\u003e in this regard.\u003c\/p\u003e\n\u003cp\u003eWhen you need to dry Pro PCTG, use 70C for 6-8 hours, or 65C for 8-12 hours if your dryer cannot reach 70C. If your dryer has no PCTG preset, use the PETG preset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in more than 40 colors\u003c\/strong\u003e, including transparent, translucent, metallic, fluorescent and Toolbox colors. \u003ca href=\"https:\/\/www.3dfuel.com\/collections\/1-75mm-pro-pctg\" title=\"All Pro PCTG colors\"\u003eSee all Pro PCTG colors.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePrint Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 250-280C (hotter for faster prints, thicker layers and hardened nozzles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e 80C on clean textured PEI, no glue. Raise 5C at a time for warping on large parts; 85-90C is fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Textured PEI. Avoid bare smooth PEI (Pro PCTG can damage it); use a glue stick as a release layer on smooth sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Cooling:\u003c\/strong\u003e 5-40%, at least half of your PETG setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e Nothing above 150 mm\/s; outer walls and top surfaces 100 mm\/s or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Volumetric Speed:\u003c\/strong\u003e 10-15 mm³\/s on a 0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance:\u003c\/strong\u003e Calibrate for Pro PCTG. Do not reuse a PETG value; this is the single biggest factor in clean prints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required. If you have one, keep it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1787915348\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG TDS\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1787908538\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG SDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in the United States. We have complete control over the manufacturing process and can ensure consistent quality for every spool. \u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel filament quality\" rel=\"noopener\" target=\"_blank\"\u003eLearn more about 3D-Fuel filament quality.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eVariable 3D filament diameters can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eEvery spool of Pro PCTG arrives on a durable plastic reel compatible with the Bambu Lab AMS, vacuum-sealed with a desiccant packet to keep out moisture. Spool sizes are net filament weight. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSee spool sizes and weights.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more. We use what we manufacture in our 3D printing operations to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG \/ 1kg 1.75mm Spool \/ Toolbox Blue","offer_id":52038529384764,"sku":"E4548","price":26.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/pro-pctg-toolbox-blue-175mm-6912753.jpg?v=1755696726"},{"product_id":"tough-pro-pla-coyote-brown-1-75mm","title":"Tough Pro PLA+, Coyote Brown, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Coyote Brown is the brown used on tactical gear and military equipment. Use it for airsoft and tactical accessories, gear mounts and military models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTough Pro PLA+ is our toughest PLA.\u003c\/strong\u003e It prints like PLA with no enclosure, and we make it in Fargo, North Dakota from NatureWorks Ingeo 3D870 resin with no fillers.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eTough Pro PLA+ Has 8.8x The Impact Toughness Of Standard PLA+\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/b8387ce3ad504d8481fc672a502190f1.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eTest parts were 3D printed on a Bambu Lab X1C at 0.2mm layer height with \u003cstrong\u003eno annealing\u003c\/strong\u003e. A 1kg standard weight was used for the drop test.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe video plays at 12.5% of real-time speed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn this drop test, Tough Pro PLA+ has 8.8x the impact toughness of our Standard PLA+.\u003c\/strong\u003e That's even before any post-processing.\u003c\/p\u003e\n\u003cp\u003eTough Pro PLA+ was designed for functional parts that need to take a hit, like brackets, clips, enclosures, tools and cosplay armor, while keeping the easy printing of PLA.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eHeat Resistance Comparison\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/01e457bd129f40cba5d3cfe874735c5d.mp4#t=0.1\" controls=\"controls\" preload=\"metadata\" loop=\"loop\" muted=\"\" playsinline=\"\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003eAs printed, Tough Pro PLA+ softens at around 55-60 °C. You can \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003eanneal your design\u003c\/a\u003e after 3D printing to raise its heat resistance to 75-85 °C.\u003c\/p\u003e\n\u003cp\u003eOne of the big questions we often get about Tough Pro PLA+ is about heat resistance, especially in a scenario like a hot car.\u003c\/p\u003e\n\u003cp\u003eYou can gain the maximum heat resistance by annealing your 3D print (furthest print from camera), but that's not always practical or feasible to do, especially as the part shrinks 1-2% during the annealing process and needs to be packed tightly in plaster or salt flour (a very fine salt powder) to reduce warping.\u003c\/p\u003e\n\u003cp\u003eBut, even without annealing, you can see that the Tough Pro PLA+ part resists heat much better than the Standard PLA+ (nearest to the camera). In some ways, in this test, the Tough Pro PLA+ part (middle part) is partially annealing in the temperature ramp-up. This is why customers state that it can work great even in a hot car in the desert of Arizona!\u003c\/p\u003e\n\u003ch2\u003eAdditional Filament Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/21998243373847-Tough-Pro-PLA-Print-Profiles\"\u003eTough Pro PLA+ Print Profiles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Printing Temperature:\u003c\/strong\u003e 230-250 °C (use the higher end for faster prints)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bed Temperature:\u003c\/strong\u003e 0-60 °C (45-60 °C helps on PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Smooth or textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Print Speed:\u003c\/strong\u003e 60-250 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 50 °C for 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360001260633-How-To-Anneal-Tough-Pro-PLA-High-Temp\" target=\"_blank\"\u003e\u003cstrong\u003eHow to anneal your Tough Pro PLA+ prints\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-3DFuel_ProPLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ SDS\"\u003e\u003cstrong\u003eDownload SDS\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-3DFuel-Pro-PLA.pdf\" title=\"3D-Fuel Tough Pro PLA+ TDS\"\u003eDownload TDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel Filament Quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Tough Pro PLA+ plastic filament arrives on an easy-to-use plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers including \u003ca href=\"https:\/\/bambulab.com\/en-us\" title=\"Bambu Lab\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e, \u003ca href=\"https:\/\/www.prusa3d.com\/\" target=\"_blank\"\u003ePrusa\u003c\/a\u003e, \u003ca href=\"https:\/\/www.creality3dofficial.com\/\" target=\"_blank\"\u003eCreality\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raise3d.com\/\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Coyote Brown","offer_id":52107821613372,"sku":"A3511","price":26.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/ProPCTG-CoyoteBrown-E4511-spool.jpg?v=1761764229"},{"product_id":"pro-pctg-electric-teal-1-75mm","title":"Pro PCTG, Electric Teal, 1.75mm","description":"\u003c!-- more --\u003e\n\u003cp\u003e3D-Fuel \u003cstrong\u003ePro PCTG is like PETG but better\u003c\/strong\u003e in many ways. It is \u003cstrong\u003etougher\u003c\/strong\u003e (8-12x the impact toughness of PETG, notched Izod), more \u003cstrong\u003echemically resistant\u003c\/strong\u003e, and its transparent colors print exceptionally clear. Pro PCTG is an easy-to-use material with a \u003cstrong\u003elower moisture absorption rate\u003c\/strong\u003e than PETG and doesn't require an enclosure - use it just like PETG.\u003c\/p\u003e\n\u003cp\u003eThe broad color selection and ease of printing make it an ideal choice for printing in a multi-color 3D printing system like the Bambu Lab AMS.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Profiles\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\" title=\"3D-Fuel Pro PCTG print profiles\" rel=\"noopener\" target=\"_blank\"\u003ePrint profiles for Pro PCTG on the Bambu Lab printers are available here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBambu AMS Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePro PCTG ships on a Bambu AMS-compatible spool (tested in the AMS, AMS 2 Pro and AMS HT). Select the \"PCTG Pro\" profile so the AMS recognizes the material. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSpool sizes and weights\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro PCTG Has 8-12x the Impact Toughness of PETG (Notched Izod)\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eKey Reasons for Better Impact Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG contains \u003cstrong\u003ecyclohexane dimethanol (CHDM)\u003c\/strong\u003e, which gives it increased flexibility and toughness compared to PETG’s ethylene glycol structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility vs. Brittleness\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG is more ductile, allowing it to absorb and dissipate energy during impact without cracking or shattering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Adhesion\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG has better inter-layer bonding when 3D printed, reducing weak points in the structure where impact forces might cause failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eReal-World Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Resistance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG parts are less likely to crack, chip, or break when dropped, making it ideal for high-impact applications like enclosures or wearable devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeated Stress\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG can endure repeated bending or sudden forces better than PETG, making it more suitable for hinges, clips, and flexible parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability in Extreme Conditions\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG resists embrittlement under low temperatures, maintaining its toughness in environments where PETG may fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eExample Use Cases Benefiting from PCTG's Toughness\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtective housings for electronics or tools.\u003c\/li\u003e\n\u003cli\u003eDrone parts and propeller guards.\u003c\/li\u003e\n\u003cli\u003eFlexible clips, snap-fits, and living hinges.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant containers or enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"table-container\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChemical Type\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003ePCTG Advantage\u003c\/th\u003e\n\u003cth\u003ePETG Limitation\u003c\/th\u003e\n\u003cth\u003eComparison (CRR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcohols\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol (IPA), ethanol, methanol\u003c\/td\u003e\n\u003ctd\u003eResists prolonged exposure without degrading or cracking.\u003c\/td\u003e\n\u003ctd\u003eDegrades or stress cracks with high alcohol concentrations over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrocarbons\u003c\/td\u003e\n\u003ctd\u003eHexane, heptane, gasoline, mineral spirits\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to hydrocarbon-based solvents.\u003c\/td\u003e\n\u003ctd\u003eSoftens or weakens when exposed to hydrocarbons.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcids\u003c\/td\u003e\n\u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n\u003ctd\u003eMaintains structural integrity in mild to moderately concentrated acids.\u003c\/td\u003e\n\u003ctd\u003eDegrades faster in acidic environments at higher concentrations.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBases (Alkalis)\u003c\/td\u003e\n\u003ctd\u003eSodium hydroxide, potassium hydroxide, ammonium hydroxide\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to strong alkalis.\u003c\/td\u003e\n\u003ctd\u003eMay crack or degrade when exposed to strong bases.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Agents\u003c\/td\u003e\n\u003ctd\u003eBleach (sodium hypochlorite), industrial degreasers, detergent solutions\u003c\/td\u003e\n\u003ctd\u003eWithstands harsh cleaning agents without discoloration or damage.\u003c\/td\u003e\n\u003ctd\u003eDiscolors, cracks, or loses properties with harsh cleaning agents over time.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils and Lubricants\u003c\/td\u003e\n\u003ctd\u003eEngine oils, hydraulic fluids, cutting oils\u003c\/td\u003e\n\u003ctd\u003eResists degradation from prolonged exposure to oils.\u003c\/td\u003e\n\u003ctd\u003eAbsorbs oils over time, potentially leading to swelling or weakening.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKetones\u003c\/td\u003e\n\u003ctd\u003eAcetone, methyl ethyl ketone (MEK)\u003c\/td\u003e\n\u003ctd\u003ePerforms slightly better in low-concentration ketones.\u003c\/td\u003e\n\u003ctd\u003eSoftens or dissolves more readily in ketone-rich environments.\u003c\/td\u003e\n\u003ctd class=\"center\"\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePro PCTG Has Lower Moisture Absorption Than PETG\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHygroscopic\u003c\/strong\u003e: PETG absorbs moisture from the air, but at a relatively low rate compared to more hygroscopic materials like nylon or TPU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Absorption Rate\u003c\/strong\u003e: Approximately \u003cstrong\u003e0.2-0.3%\u003c\/strong\u003e by weight after prolonged exposure to humid environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eDuring printing, moisture in PETG can lead to stringing, bubbling, and surface defects due to water vaporizing in the hotend.\u003c\/li\u003e\n\u003cli\u003eMechanical properties (like impact strength) can slightly degrade over time with prolonged exposure to high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePCTG\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlightly Lower Moisture Absorption\u003c\/strong\u003e: PCTG absorbs less moisture than PETG, typically around \u003cstrong\u003e0.1-0.2%\u003c\/strong\u003e by weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Resistance\u003c\/strong\u003e: Due to its cyclohexane dimethanol (CHDM) component, PCTG’s molecular structure makes it less hygroscopic and more resistant to moisture-induced degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffects of Moisture\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePCTG generally performs better than PETG in humid conditions, retaining clarity, toughness, and dimensional stability for longer periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy the Difference?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular Structure\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePETG’s glycol modification increases flexibility but leaves the material slightly more hygroscopic.\u003c\/li\u003e\n\u003cli\u003ePCTG’s modified structure with CHDM reduces the polar sites available for moisture interaction, resulting in less absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003ePractical Implications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e3D Printing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG\u003c\/strong\u003e: Requires drying more frequently, especially if exposed to humid environments, as even slight moisture absorption can lead to print defects (bubbling, stringing, poor adhesion).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG\u003c\/strong\u003e: Requires less frequent drying, making it easier to handle in environments with higher humidity. It is also more forgiving if printed without drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoth materials benefit from being stored in airtight containers with desiccant.\u003c\/li\u003e\n\u003cli\u003ePCTG will be less prone to degradation if exposed to moisture for extended periods compared to PETG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Use in Humid Environments\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCTG is more stable\u003c\/strong\u003e and less likely to lose mechanical properties over time in high-humidity settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eDrying\u003c\/h3\u003e\n\u003cp\u003eFor both materials, drying before printing and proper storage is recommended for optimal performance, but \u003cstrong\u003ePCTG is less maintenance-intensive\u003c\/strong\u003e in this regard.\u003c\/p\u003e\n\u003cp\u003eWhen you need to dry Pro PCTG, use 70C for 6-8 hours, or 65C for 8-12 hours if your dryer cannot reach 70C. If your dryer has no PCTG preset, use the PETG preset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in more than 40 colors\u003c\/strong\u003e, including transparent, translucent, metallic, fluorescent and Toolbox colors. \u003ca href=\"https:\/\/www.3dfuel.com\/collections\/1-75mm-pro-pctg\" title=\"All Pro PCTG colors\"\u003eSee all Pro PCTG colors.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003ePrint Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 250-280C (hotter for faster prints, thicker layers and hardened nozzles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e 80C on clean textured PEI, no glue. Raise 5C at a time for warping on large parts; 85-90C is fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Surface:\u003c\/strong\u003e Textured PEI. Avoid bare smooth PEI (Pro PCTG can damage it); use a glue stick as a release layer on smooth sheets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Cooling:\u003c\/strong\u003e 5-40%, at least half of your PETG setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e Nothing above 150 mm\/s; outer walls and top surfaces 100 mm\/s or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Volumetric Speed:\u003c\/strong\u003e 10-15 mm³\/s on a 0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance:\u003c\/strong\u003e Calibrate for Pro PCTG. Do not reuse a PETG value; this is the single biggest factor in clean prints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Not required. If you have one, keep it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1787915348\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG TDS\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1787908538\" rel=\"noopener\" target=\"_blank\"\u003ePro PCTG SDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in the United States. We have complete control over the manufacturing process and can ensure consistent quality for every spool. \u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\" title=\"3D-Fuel filament quality\" rel=\"noopener\" target=\"_blank\"\u003eLearn more about 3D-Fuel filament quality.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eVariable 3D filament diameters can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eEvery spool of Pro PCTG arrives on a durable plastic reel compatible with the Bambu Lab AMS, vacuum-sealed with a desiccant packet to keep out moisture. Spool sizes are net filament weight. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374\" title=\"3D-Fuel spool sizes and weights\" rel=\"noopener\" target=\"_blank\"\u003eSee spool sizes and weights.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more. We use what we manufacture in our 3D printing operations to ensure that our filament provides the best quality possible.\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG \/ 1kg 1.75mm Spool \/ Electric Teal","offer_id":52848391291196,"sku":"E4528","price":26.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Pro_PCTG_Electric_Teal_E4528_polarized.jpg?v=1788563153"}],"url":"https:\/\/www.3dfuel.com\/collections\/bfcm-2026-extra-10-off.oembed","provider":"3D-Fuel","version":"1.0","type":"link"}