HydroPro - Professional Water Soluble Filament

$89.99
SKU S2400

HydroPro™ dissolves quickly and completely in water and is easier to print with than other water-soluble materials such as PVA and PVOH.

HydroPro™ is non-toxic and fully biodegradable, meaning it can be rinsed down the drain without harming the environment or wildlife.

Superpower

HydroPro™ only needs to be soaked for 1-2 hours to easily work supports off by hand, or 2-6 hours to dissolve completely.

Best Suited For

Use it as a support material to print large overhangs, intricate inner geometry, and deep cavities.

Print Settings

Extruder: 210 - 230 C 
Build plate: 45 - 60 C 
Speeds: Start with your favorite PLA settings 
Retraction Distance: 1 - 10 mm 
Retraction Speed: 20 mm/s

Bed Material

PEI, Buildtak recommended with a heated build plate (45-60° C)

Note

Because HydroPro™ breaks down in the water, it is sensitive to high levels of humidity in the air. For best results, store unused HydroPro™ filament in a sealed container with desiccant.