Our Pro PLA is the best PLA product available for printing your projects. Made from NatureWorks™ 3D870 Ingeo PLA, it offers a third-generation leve...View full details
Pro PLA (formerly APLA+) has higher impact strength than ABS and PLA with a heat resistance rivaling that of ABS! Available in 1.75mm and 2.85mm diameter, new Pro PLA will help your 3D printed projects look amazing and perform amazingly.
Anneal your design after 3D printing for even better heat resistance.
Pro PLA is engineered and designed specifically with 3D printing in mind. Pro PLA was designed with the high impact strength needed in industrial applications to meet the growing demand by companies for a material with the properties of ABS, but the printability of PLA. Without any annealing/heat treating, Pro PLA displays impact strength levels at 8 times that of standard PLA and 1.5 times that of ABS. Annealing Pro PLA gives it over 12x the impact strength of standard PLA and over twice that of ABS. Even before post-processing, Pro PLA exhibits significantly higher impact strength than ABS.
Recommended Print Settings: Extruder Temp: 210-240C (varies by printer)
Heated Bed Temp: 0-60C (heated bed not required)
Bed Surface: Bare acrylic, blue painters tape + hairspray, glass + hairspray, BuildTak (or similar bed surface), PEI (with heated bed @ 45-60C)
Annealing Info (heat treating): Learn how to heat treat (anneal) Pro PLA Learn more about Pro PLA
Try out 3D-Fuel filaments without committing to a full spool! Each material comes in a 50g coil in a resealable bag with desiccant.