Skip to content

News

RSS
  • Milliwave Silicon Solutions and 3D-Fuel 3D Filaments
    March 12, 2020 3dfuel Admin

    Milliwave Silicon Solutions and 3D-Fuel 3D Filaments

    We're always thrilled to see great work done with our 3D-Fuel filaments (@3Ddfuel / 3dfuel.com). Here you see some MilliBox gimbals created by Milliwave Silicon Solutions (www.millibox.org/) used for over the air 3D radiation pattern measurement of #mmWave antenna in particular...

    Read now
  • March 10, 2020 3dfuel Admin

    Does Filament Quality Really Matter?

    If you’re new to 3D Printing, you may wonder what all the specs listed with 3D filament are and why they matter. Well, each spec is there for a reason. And they are important. Let’s talk about a few of...

    Read now
  • 3D-Fuel Launches Workday ABS & ASA Filaments
    November 30, 2018 John Schneider

    3D-Fuel Launches Workday ABS & ASA Filaments

    ABS and ASA are materials that we’ve worked with before and for which we strive to find a full bio-based replacement. However, we see that many of our customers absolutely require ABS or ASA for their applications. We simply weren’t prepared to release a 3D-Fuel ABS or ASA to the market until we were certain we had identified the very best version of those materials for 3D printing. I’m very happy to say that we have that best version and are able to offer a more complete lineup and to service all of the 3D printing community.
    Read now
  • The Real Cost of Cheap 3D Printer Filament
    March 19, 2018 Carl Powell

    The Real Cost of Cheap 3D Printer Filament

    The Real Cost of Cheap 3D Printer Filament One factor that many forget about when calculating the cost of the filament is wasted time and materials. Yes, you can get a 1kg spool of no-name filament for $20 – a...

    Read now
  • The Real Cost of Cheap 3D Printer Filament
    February 13, 2018 John Schneider

    The Real Cost of Cheap 3D Printer Filament

    The Real Cost of Cheap 3D Printer Filament One factor that many forget about when calculating the cost of the filament is wasted time and materials. Yes, you can get a 1kg spool of no-name filament for $20 – a...

    Read now
  • 3D-Fuel™ Introduces New Water Soluble Filament
    May 24, 2017 John Schneider

    3D-Fuel™ Introduces New Water Soluble Filament

    Shop HydroSupport Filament Water soluble filaments for 3D printing have been around for a while but most, such as PVA, are difficult to work with. In an effort to offer a better support material, today 3D-Fuel is introducing a new...

    Read now
  • 3D-Fuel™ To Dramatically Increase Filament Offerings
    March 22, 2016 John Schneider

    3D-Fuel™ To Dramatically Increase Filament Offerings

    Bonne Terre, Missouri, USA, February 29, 2016 3D-Fuel is celebrating Leap Day with a leap forward in their manufacturing capabilities and product offerings. Contrary to a recent press release by another manufacturer, 3D-Fuel will continue to manufacture a full line...

    Read now
  • August 27, 2015 3dfuel Admin

    Wound Up™: Where You've Seen It

    The 3D printing community was percolating some excitement about Wound Up coffee filament. Here's where you may have seen it covered.   Coffee-based filament turns java into brown 3D-printed objects One of These Little Guys Was 3D Printed From Recycled...

    Read now
  • Engineering-grade Glass Filled PLA released by 3Dom USA
    July 28, 2015 John Schneider

    Engineering-grade Glass Filled PLA released by 3Dom USA

    July 28, 2015 – US based filament manufacturer 3Dom USA announces today the release of a first of its kind engineering-grade filament, Glass Filled PLA. As a composite PLA/glass material, Glass Filled PLA filament can be used on any machine...

    Read now