HydroPro - Professional Water Soluble Filament 1.75mm
Order in cartons of 6 and save more. See chart below!
Orders over $49 get FREE SHIPPING! (US 48 states)
HydroPro™ dissolves quickly and completely in water and is easier to print with than other water-soluble materials such as PVA and PVOH.
HydroPro™ is non-toxic and fully biodegradable, meaning it can be rinsed down the drain without harming the environment or wildlife.
HydroPro™ only needs to be soaked for 1-2 hours to easily work supports off by hand, or 2-6 hours to dissolve completely.
Best Suited For
Use it as a support material to print large overhangs, intricate inner geometry, and deep cavities.
Download the HydroPro SDS
Download the HydroPro TDS
Extruder: 210 - 230 C
Build plate: 45 - 60 C
Speeds: Start with your favorite PLA settings
Retraction Distance: 1 - 10 mm
Retraction Speed: 20 mm/s
PEI, Buildtak recommended with a heated build plate (45-60° C)
Because HydroPro™ breaks down in the water, it is sensitive to high levels of humidity in the air. For best results, store unused HydroPro™ filament in a sealed container with desiccant.