THEY'RE HERE.
No, not the printers themselves - the profiles!
We've worked tirelessly not only to create brand-new profiles for brand-new printers, but also to refine the existing profiles even further.
On the Bambu H2C, there are even 0.6mm nozzle profiles for all three materials and a 0.2mm profile for the Standard PLA+ filament.
In addition, we've added profiles for Bambu P2S: Standard PLA+, Tough Pro PLA+, and (of course) Pro PCTG.
We'll continue to refine all of these profiles as we gain more print time and incorporate more nozzle diameters and high-flow variations.
On top of all of this, we've also refined existing Bambu Lab profiles for:
- Greater consistency of heat bed temperatures for more reliable bed adhesion
- More accurate material density values for more precise material use estimates
- Pro PCTG heated chamber temp of 0 °C to improve serial print job performance
- Removal of the chamber exhaust code in some profiles
I'm sure that you're all busy and in the thick of 3D printing gifts for your friends, family, customers, and (hopefully!) for yourself, too.
We hope that you're having an exciting holiday season and that these new and improved profiles help you to Fuel Your Creativity more effectively than ever!
Profile Links
Leave a comment