ReFuel™3D - Fuel Recycled PETG , 1.75mm - 3D - Fuel

ReFuel™3D-Fuel Recycled PETG , 1.75mm

Natural / 1kg 1.75mm Spool / Pro PETG
$21.90
$21.90 $28.95 Save 24%
Skip to product information
ReFuel™3D - Fuel Recycled PETG , 1.75mm - 3D - Fuel
  • ReFuel™3D - Fuel Recycled PETG , 1.75mm - 3D - Fuel
  • ReFuel™3D - Fuel Recycled PETG , 1.75mm - 3D - Fuel
  • ReFuel™3D - Fuel Recycled PETG , 1.75mm - 3D - Fuel

  • Enhanced chemical resistance

  • Low moisture absorption

  • Up to 30X Tougher than PETG

  • No Enclosure 
Required

Pro PCTG → Print Settings + Profiles

Find your Pro PCTG profile here.

At 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

  • Start with a PETG profile
  • Increase hotend temp to 250-280C
  • Set textured PEI bed temp to 80C
  • Decrease cooling fan speeds as low as possible
  • No enclosure needed but, if you have one, close the lid and doors
  • If your enclosure is heated, 45C is a good temperature.
  • Calibrate your pressure advance settings
  • Enable a wipe move after retraction
Drying + Storing Instructions

Dry filament is happy filament!

If your dryer can reach 70C, dry at 70C. Otherwise, dry at 65C for a longer period.
Drying Temp: 70C
Drying Time: 6-8 hours

Drying Temp: 65C
Drying Time: 8-12 hours

Please store Pro PCTG in an airtight container with desiccant when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.

Wet filament can cause a poor surface finish on your printed part and may even contribute to nozzle clogging.
Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

  • Outer Diameter: 200mm
  • Width: 68mm
  • Empty Weight: 155g
  • Material: Recycled HIPS

Learn more about our current and past spool types.
ReFuel™3D-Fuel Recycled PETG , 1.75mm
4.7 | 6 Reviews

ReFuel™3D-Fuel Recycled PETG , 1.75mm

Pro PCTG is engineered to handle higher stress and repeated use compared to basic filaments. It’s perfect for projects where durability, impact resistance, and print clarity matter most.

SKU: E15R0

$21.90
$21.90 $28.95 Save 24%

Filament Color: 3D-Fuel Recycled PETG

Clearly Natural
Filament Spool Size: 1KG
Filament Material: Pro PETG

Quantity: 1 Spools

FREE US SHIPPING for orders over $75

CUSTOMERS OFTEN PURCHASE TOGETHER

Loading product recommendations

  • Enhanced chemical resistance

  • Low moisture absorption

  • Up to 30X Tougher than PETG

  • No Enclosure 
Required

Pro PCTG → Print Settings + Profiles

Find your Pro PCTG profile here.

At 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

  • Start with a PETG profile
  • Increase hotend temp to 250-280C
  • Set textured PEI bed temp to 80C
  • Decrease cooling fan speeds as low as possible
  • No enclosure needed but, if you have one, close the lid and doors
  • If your enclosure is heated, 45C is a good temperature.
  • Calibrate your pressure advance settings
  • Enable a wipe move after retraction
Drying + Storing Instructions

Dry filament is happy filament!

If your dryer can reach 70C, dry at 70C. Otherwise, dry at 65C for a longer period.
Drying Temp: 70C
Drying Time: 6-8 hours

Drying Temp: 65C
Drying Time: 8-12 hours

Please store Pro PCTG in an airtight container with desiccant when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.

Wet filament can cause a poor surface finish on your printed part and may even contribute to nozzle clogging.
Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

  • Outer Diameter: 200mm
  • Width: 68mm
  • Empty Weight: 155g
  • Material: Recycled HIPS

Learn more about our current and past spool types.

CUSTOMERS OFTEN PURCHASE TOGETHER

Loading product recommendations

The 3D Fuel Difference

Manufactured in the U.S.

Manufactured in the U.S.

Across multiple production facilities, ensuring we maintain consistent quality for every spool.

Diameter Tolerance

Diameter Tolerance

We use a multi-axis laser measurement system to ensure a diameter tolerance is +/- 0.02 mm.

Test Printed In-House

Test Printed In-House

We 3D print what we manufacture to ensure that our filament provides the best quality possible.

LEARN MORE

Downloads

Filament TDS

TECHNICAL DATA SHEET

Filament SDS

SAFETY DATA SHEET

Filament RoHS

Substance compliance

Filament Hex Code

COLOR CODE LIBRARY

Reviews

Overall rating: 4.6666665 / 5 from 6 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Great color, stringy prints.

"Doesn’t matter how many times I dry it, I’m still getting bad adhesion to each layer and it’s stringy - both randomly. Same prints I use regular PETG for."

— Dean (3/5)

PETG

"Have yet to use it but happy with the delivery"

— Logan M. (5/5)

ReFuel PETG

"Love it, first time printing with PETG. Prints beautifully. Thanks 3D-Fuel"

— Ryan H. (5/5)

Switching to Re-Fuel and not looking back..

"Bought 6 rolls of the PETG re-fuel. Changed both my printers over to it and started printing. Wound up at 250 on the hot end and 80 on the bed to get good flow and adhesion. The majority of my prints and painted anyway so the colors dont really matter. Overall really happy with it and will be using the re-fuel PETG only."

— james h. (5/5)

Great Filament Value

"A quality PETG that prints just like the best, but at an unbeatable price. I received what appears to be pure six pure black spools. My previous recycled PLA purchases were dark green to dark gray. You never know what color you'll get, which is half the fun. I can always purchase a specific color when needed. For prototyping and functional parts, ReFuel cannot be beat."

— Todd G. (5/5)

Really Spectacular

"This stuff is legitimately amazing! I happened to catch it on a good sale, but I'd be happy to pay full price, as this is easily the highest quality PETG I've used. I'm also very, very bummed that the color I got is not something I can order more of. It's a super sexy silk, dark charcoal gray. I'm glad I got six rolls, though, three are already used up, lol."

— Isaac H. (5/5)

Q&A