STEP 1
Order
A 10-pack case of Pro PCTG Midnight Black arrives with each spool vacuum-sealed and ready.
No individual boxes. No refill spool assembly.
Open the case and start printing.
FarmFuel by 3D-Fuel
Ten Spools in One Box. Nothing Left to Throw Away.
FarmFuel is a closed-loop filament system built for print farms running 20 or more printers.
You vacuum-sealed Pro PCTG in Midnight Black, with no individual packaging, and a prepaid label to send the empties back.
Lots of 3D Printers Means Packaging You Didn’t Sign Up For
Ten spools ordered means ten boxes to open, flatten, and stack somewhere.
Then a shipping carton, then a recycling run, and a dumpster bill — or both.
If you’re using refill coils, add the time spent reassembling spools and the filament coil lost every time a refill gets rushed and fails.
None of this shows up on a P&L, but it costs real money, and it happens every single week at scale.
10
Individual boxes per standard order
3,000
Boxes disposed of per month at 100 printers
$50
Cost of return shipping with FarmFuel
One Case Has Everything You Need to Keep Printing
SPECIFICATIONS
10 × 1kg Pro PCTG Midnight Black spools per case
Spools are individually vacuum-sealed
Grid divider keeps spools stable in transit
Desiccant packs can be sent back
Prepaid return label included
AMS-compatible spool dimensions
Pro PCTG is up to 8-12× tougher than PETG and requires no enclosure (other 3D-Fuel filaments to be available in FarmFuel later this year)
Order. Swap. Send.
STEP 2
Swap
Pull a spool from the case. Load it. Keep printing.
Spool changes for the entire case take less than 2.5 minutes.
No refill coils.
No cardboard.
No extra steps.
STEP 3
Send
When the spools are empty:
- Place them back in the case
- Add the desiccant packs
- Tape it shut
- Apply the prepaid label
- Add it to your outbound pile
We handle the rest!
Simple. Repeatable. Scalable.
How Much Is This Costing Your Operation?
The packaging problem becomes obvious once it’s put on paper.
The CEO of 3D-Fuel ran these numbers after speaking with print farm operators.
Here’s what he found.
Boxes
A 3D printer farm running 100 printers, each consuming 1kg every two days, running 6 days per week.
That’s:
- 50 spools per day
- 300 individual spool boxes to dispose of per week
- 1200 boxes per month
With FarmFuel:
- 5 cases per day
- 30 cases per week
- 120 cases per month
- 1080 fewer boxes to handle
Disposal Cost
Dumpster rental for cardboard and plastic can range from $80–$300 per month, depending on location and service frequency.
Recycling runs require staff time and vehicle time. Neither appears on your filament invoice.
Filament Loss
Refill coils fail when rushed.
One tangled or improperly loaded coil can ruin an entire spool.
At $20–$25 per spool, one failed spool per week equals:
$1,000–$1,300 in wasted filament annually.
FarmFuel uses AMS-compatible plastic spools, so no coil handling and no failure point.
“We didn't build FarmFuel to sell more filament. We built it because we kept seeing the same problem and believed there was a simpler way to solve it.”
Ready to Remove Excess Packaging from Your Operation?
1
CASE
10 Spools
10 x 1kg spools
$249per Case
$24.90 per spool
5
CASES
50 Spools
50 x 1kg spools
2% OFF$244per Case
$24.40 per spool
10
CASES
100 Spools
100 x 1kg spools
BEST VALUE
4% OFF
$239per Case
$23.90 per spool
Recommended structure mirrors the current Pro PCTG volume discount model.
Free U.S. shippingon orders $99+.
Ships fromFargo, ND
Pro PCTGMidnight Black
1.75mmdiameter
1kg spoolsFull Size
Common Questions from Print Farm Operators
We already buy in bulk from another supplier. Why switch?
FarmFuel isn’t asking you to change your filament; we’re offering a solution for all the packaging that comes with it. FarmFuel eliminates individual boxes and provides a closed-loop return system for empty spools.
What filament is included?
Pro PCTG Midnight Black, 1.75mm, 1kg spools. The same engineering-grade Pro PCTG that is sold individually through 3dfuel.com, but now delivered without individual packaging.
Do I need to change how we print?
If you’re already printing individual spools of Pro PCTG, no changes are necessary. This is the same great Pro PCTG, just in different packaging. If you’re new to Pro PCTG, we have already developed filament profiles for the most popular desktop 3D printers found in print farms. Pro PCTG prints similarly to PETG with slightly higher hotend temperatures (250–280°C) and a textured PEI bed at 80°C. No enclosure required.
What happens to the empty spools and desiccant packs?
Place everything back into the case, seal it, apply the prepaid label, and add it to your outbound shipments. 3D-Fuel handles the rest. The only packaging that will be discarded is the vacuum seal bags.
Will additional colors and materials be available?
Launch inventory is limited to Pro PCTG Midnight Black, but additional colors and materials are planned. Early operators will have input into future expansions.
What if a spool arrives damaged?
Contact 3D-Fuel directly at sales@3dfuel.com. Every case is vacuum-sealed and checked before shipping. If something arrives wrong, we’ll make it right.
Reviews
Highest Quality Materials
Made in the USA
Trusted by Tens of Thousands
USA-Based Support
100% Satisfaction Guarantee
FarmFuel is saving us time and money
FarmFuel isn’t asking you to change your filament; it's the solution for all the packaging that comes with it. FarmFuel eliminates individual boxes and provides a closed-loop return system for empty spools.
— Clint, Verified Buyer
Follow Us
Newsletter
Join our Community.
©2026 3D-Fuel