3D-Fuel PETG Snow White 1.75 1 kg Horizontal spool

Pro PETG, Snow White, 1.75mm

Snow White / 1kg 1.75mm Spool / Pro PETG

$28.95

$28.95 $28.95

Enhanced chemical resistance
Low moisture absorption
Up to 30X Tougher than PETG
No Enclosure  Required

Pro PCTG → Print Settings + Profiles

At 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

Start with a PETG profile
Increase hotend temp to 250-280C
Set textured PEI bed temp to 80C
Decrease cooling fan speeds as low as possible
No enclosure needed but, if you have one, close the lid and doors
If your enclosure is heated, 45C is a good temperature.
Calibrate your pressure advance settings
Enable a wipe move after retraction

Drying + Storing Instructions

Dry filament is happy filament!

If your dryer can reach 70C, dry at 70C. Otherwise, dry at 65C for a longer period.
Drying Temp: 70C
Drying Time: 6-8 hours

Drying Temp: 65C
Drying Time: 8-12 hours

Please store Pro PCTG in an airtight container with desiccant when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.

Wet filament can cause a poor surface finish on your printed part and may even contribute to nozzle clogging.

Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

Outer Diameter: 200mm
Width: 68mm
Empty Weight: 155g
Material: Recycled HIPS

Learn more about our current and past spool types.

Pro PETG, Snow White, 1.75mm

Q: Pro PCTG → Print Settings + Profiles

Find your Pro PCTG profile here. At 3D-Fuel, we&#39;re working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we&#39;re unable to cover every single 3D printer brand, model, and upgrade permutation. We have our developed profiles available here for download, but if you have a 3D printer we don&#39;t have a profile for yet, you can easily create one using the steps below: Start with a PETG profile Increase hotend temp to 250-280C Set textured PEI bed temp to 80C Decrease cooling fan speeds as low as possible No enclosure needed but, if you have one, close the lid and doors If your enclosure is heated, 45C is a good temperature. Calibrate your pressure advance settings Enable a wipe move after retraction

Pro PCTG is engineered to handle higher stress and repeated use compared to basic filaments. It’s perfect for projects where durability, impact resistance, and print clarity matter most.

SKU: E1503

HEX Code: #EEF2EF

$28.95

$28.95 $28.95

Filament Color: Snow White

Filament Spool Size: 1KG 1KG | 1.75mm Spool 4KG | 1.75mm Spool

Filament Material: Pro PETG Pro PETG

Quantity: 1 Spools

FREE US SHIPPING for orders over $75

Pickup available at Fargo. Usually ready in 24 hours.

3D Clean™ Cleaning/Purging, 1.75mm

(21)

$18.00

Pro PETG, Snow White, 1.75mm

$28.95

Loading product recommendations

Enhanced chemical resistance
Low moisture absorption
Up to 30X Tougher than PETG
No Enclosure  Required

Pro PCTG → Print Settings + Profiles

Find your Pro PCTG profile here.

At 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

Start with a PETG profile
Increase hotend temp to 250-280C
Set textured PEI bed temp to 80C
Decrease cooling fan speeds as low as possible
No enclosure needed but, if you have one, close the lid and doors
If your enclosure is heated, 45C is a good temperature.
Calibrate your pressure advance settings
Enable a wipe move after retraction

Drying + Storing Instructions

Dry filament is happy filament!

If your dryer can reach 70C, dry at 70C. Otherwise, dry at 65C for a longer period.
Drying Temp: 70C
Drying Time: 6-8 hours

Drying Temp: 65C
Drying Time: 8-12 hours

Please store Pro PCTG in an airtight container with desiccant when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.

Wet filament can cause a poor surface finish on your printed part and may even contribute to nozzle clogging.

Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.