Pro PETG, Charcoal Gray, 1.75mm

Pro PETG, Charcoal Gray, 1.75mm

Charcoal Gray / 1kg 1.75mm Spool / Pro PETG
$28.95
$28.95 $28.95
Skip to product information
Pro PETG, Charcoal Gray, 1.75mm
  • Pro PETG, Charcoal Gray, 1.75mm
  • Pro PETG, Charcoal Gray, 1.75mm
  • Pro PETG, Charcoal Gray, 1.75mm

  • Enhanced chemical resistance

  • Low moisture absorption

  • Up to 30X Tougher than PETG

  • No Enclosure 
Required

Pro PCTG → Print Settings + Profiles

Find your Pro PCTG profile here.

At 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

  • Start with a PETG profile
  • Increase hotend temp to 250-280C
  • Set textured PEI bed temp to 80C
  • Decrease cooling fan speeds as low as possible
  • No enclosure needed but, if you have one, close the lid and doors
  • If your enclosure is heated, 45C is a good temperature.
  • Calibrate your pressure advance settings
  • Enable a wipe move after retraction
Drying + Storing Instructions

Dry filament is happy filament!

If your dryer can reach 70C, dry at 70C. Otherwise, dry at 65C for a longer period.
Drying Temp: 70C
Drying Time: 6-8 hours

Drying Temp: 65C
Drying Time: 8-12 hours

Please store Pro PCTG in an airtight container with desiccant when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.

Wet filament can cause a poor surface finish on your printed part and may even contribute to nozzle clogging.
Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

  • Outer Diameter: 200mm
  • Width: 68mm
  • Empty Weight: 155g
  • Material: Recycled HIPS

Learn more about our current and past spool types.
Pro PETG, Charcoal Gray, 1.75mm
5.0 | 1 Review

Pro PETG, Charcoal Gray, 1.75mm

Pro PCTG is engineered to handle higher stress and repeated use compared to basic filaments. It’s perfect for projects where durability, impact resistance, and print clarity matter most.

SKU: E15A2

HEX Code: #45494B

$28.95
$28.95 $28.95

Filament Color: Charcoal Gray

Clearly Natural
Filament Spool Size: 1KG
Filament Material: Pro PETG

Quantity: 1 Spools

FREE US SHIPPING for orders over $75

CUSTOMERS OFTEN PURCHASE TOGETHER

Loading product recommendations

  • Enhanced chemical resistance

  • Low moisture absorption

  • Up to 30X Tougher than PETG

  • No Enclosure 
Required

Pro PCTG → Print Settings + Profiles

Find your Pro PCTG profile here.

At 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

  • Start with a PETG profile
  • Increase hotend temp to 250-280C
  • Set textured PEI bed temp to 80C
  • Decrease cooling fan speeds as low as possible
  • No enclosure needed but, if you have one, close the lid and doors
  • If your enclosure is heated, 45C is a good temperature.
  • Calibrate your pressure advance settings
  • Enable a wipe move after retraction
Drying + Storing Instructions

Dry filament is happy filament!

If your dryer can reach 70C, dry at 70C. Otherwise, dry at 65C for a longer period.
Drying Temp: 70C
Drying Time: 6-8 hours

Drying Temp: 65C
Drying Time: 8-12 hours

Please store Pro PCTG in an airtight container with desiccant when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.

Wet filament can cause a poor surface finish on your printed part and may even contribute to nozzle clogging.
Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

  • Outer Diameter: 200mm
  • Width: 68mm
  • Empty Weight: 155g
  • Material: Recycled HIPS

Learn more about our current and past spool types.

CUSTOMERS OFTEN PURCHASE TOGETHER

Loading product recommendations

The 3D Fuel Difference

Manufactured in the U.S.

Manufactured in the U.S.

Across multiple production facilities, ensuring we maintain consistent quality for every spool.

Diameter Tolerance

Diameter Tolerance

We use a multi-axis laser measurement system to ensure a diameter tolerance is +/- 0.02 mm.

Test Printed In-House

Test Printed In-House

We 3D print what we manufacture to ensure that our filament provides the best quality possible.

LEARN MORE

Downloads

Filament TDS

TECHNICAL DATA SHEET

Filament SDS

SAFETY DATA SHEET

Filament RoHS

Substance compliance

Filament Hex Code

COLOR CODE LIBRARY

Reviews

Overall rating: 5.0 / 5 from 1 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Great Price and Quality

"Awesome filament. Will definitely buy more."

— manuel c. (5/5)

Q&A