Fluorescent Green Standard PLA+ 1.75mm filament by 3D-Fuel

Standard PLA+, Fluorescent Green, 1.75mm

Standard PLA+ / 1kg 1.75mm Spool / Fluorescent Green

$22.95

$22.95 $25.95 Save 12%

Pure PLA from USA-grown Corn
No Fillers
Prints at 220 - 250C
No Enclosure Required

What makes Standard PLA+ "plus"?

Standard PLA+ is our everyday PLA. "PLA+" has no industry definition, so here is what ours means:

100% virgin NatureWorks Ingeo 4043D, with no fillers or regrind
±0.02 mm diameter, measured by multi-axis laser
Tuned for modern fast printers: 220-250 °C and up to 250 mm/s
AMS-compatible 1 kg spools and free print profiles

Need parts that take a hit? Step up to Tough Pro PLA+.

Can I use Standard PLA+ as supports for Pro PCTG?

Yes, as a breakaway support interface on multi-nozzle printers such as the Bambu Lab H2D, H2C, X2D or Prusa XL. Never run PLA and PCTG through the same nozzle.

Print the Standard PLA+ at 240 °C
Supports at 60 mm/s, interfaces at 50 mm/s
Chamber heat off

PLA+ from other brands often contains additives and may not release cleanly. Full guide in our Help Center.

Is Standard PLA+ food safe?

The resin is. Standard PLA+ is made from NatureWorks Ingeo 4043D, which complies with FDA food-contact rules (FCN 178) and EU Regulation 10/2011 as supplied.

A 3D-printed part is different: layer lines trap food and bacteria and can't be fully cleaned, so a printed part isn't food safe without a food-safe coating. PLA also softens around 55-60 °C, so keep it away from hot food, hot drinks and the dishwasher.

Standard PLA+ → Print Settings

Most Generic PLA profiles will work fine for 3D-Fuel Standard PLA+.

However, at 3D-Fuel, we're working to develop optimized Standard PLA+ profiles for as many popular 3D printers as possible. Unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

Start with a generic PLA profile
Recommended Printing Temperature: 220-250C (start at 240C)
Recommended Bed Temperature: 0-60C
Bed Surface: Smooth or Textured PEI, BuildTak, WhamBam
Recommended Print Speed: 60 – 250 mm/s

Standard PLA+ → Print Profiles

3D-Fuel's in-house developed Standard PLA+ print profiles are an excellent starting point for printing with our Standard PLA+.

Drying + Storing Instructions

Dry filament is happy filament!

Drying Temp: 50C
Drying Time: 6-8 hours

Please store Standard PLA+ in an airtight container with desiccant when possible.

Wet filament can result in a poor surface finish on your printed part and may even contribute to clogged nozzles.

Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

Outer Diameter: 200mm
Width: 68mm
Empty Weight: 155g
Material: Recycled HIPS

Learn more about our current and past spool types.

Standard PLA+, Fluorescent Green, 1.75mm

4.9 | 223 Reviews

Standard PLA+, Fluorescent Green, 1.75mm

Name: Standard PLA+, Fluorescent Green, 1.75mm
Brand: 3D-Fuel
SKU: A15F7
Price: 22.95 USD
Availability: InStock
Rating: 4.9 (223 reviews)

Standard PLA+ is our everyday PLA: 100% virgin NatureWorks Ingeo 4043D with no fillers, held to ±0.02 mm and tuned to print hot and fast. Need parts that take a hit? Step up to Tough Pro PLA+.

SKU: A15F7

HEX Code: #46BD69

TD: 6.6

$22.95

$22.95 $25.95 Save 12%

Filament Color: Fluorescent Green | Glows under blacklight; bright in daylight