Standard PLA+, Autumn Orange, 1.75mm

Standard PLA+ / 4kg 1.75mm Spool / Autumn Orange - #D15531

$99.90

$99.90 $99.90

Pure PLA from USA-grown Corn
No Fillers or Additives
Prints at 230 - 250C
No Enclosure Required

Standard PLA+ → Print Settings

Most Generic PLA profiles will work fine for 3D-Fuel Standard PLA+.

However, at 3D-Fuel, we're working to develop optimized Standard PLA+ profiles for as many popular 3D printers as possible. Unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:

Start with a generic PLA profile
Recommended Printing Temperature: 230-250C
Recommended Bed Temperature: 0-60C
Bed Surface: Smooth or Textured PEI, BuildTak, WhamBam
Recommended Print Speed: 60 – 250 mm/s

Standard PLA+ → Print Profiles

3D-Fuel's in-house developed Standard PLA+ print profiles are an excellent starting point for printing with our Standard PLA+.

Drying + Storing Instructions

Dry filament is happy filament!

Drying Temp: 50C
Drying Time: 6-8 hours

Please store Standard PLA+ in an airtight container with desiccant when possible.

Wet filament can result in a poor surface finish on your printed part and may even contribute to clogged nozzles.

Spool Specifications - AMS Compatible

We recently introduced a new lightweight plastic spool that uses 29% less plastic.

It works well in AMS and AMS Lite units, as well as in other units that use a similar spool type.

Outer Diameter: 200mm
Width: 68mm
Empty Weight: 155g
Material: Recycled HIPS

Learn more about our current and past spool types.

Standard PLA+, Autumn Orange, 1.75mm

4.9 | 223 Reviews

Standard PLA+, Autumn Orange, 1.75mm

Q: Standard PLA+ → Print Profiles

3D-Fuel&#39;s in-house developed Standard PLA+ print profiles are an excellent starting point for printing with our Standard PLA+.

Q: Drying + Storing Instructions

Dry filament is happy filament! Drying Temp: 50C Drying Time: 6-8 hours Please store Standard PLA+ in an airtight container with desiccant when possible. Wet filament can result in a poor surface finish on your printed part and may even contribute to clogged nozzles.

Standard PLA+ is a pure, entry-level PLA filament. It's available in a broad color selection and uses only virgin NatureWorks Ingeo 4043d PLA resin. No fillers or stretchers means a more predictable 3D printing experience.

SKU: A17A5

HEX Code: #CF5227

TD: 5.0

$99.90

$99.90 $99.90

Filament Color: Autumn Orange

Filament Material: Standard PLA+ Standard PLA+

Filament Spool Size: 4KG 1KG | 1.75mm Spool 4KG | 1.75mm Spool

Quantity: 1 Spools

FREE US SHIPPING for orders over $99

3D Clean™ Cleaning/Purging, 1.75mm

(21)

$18.00

Loading product recommendations

Pure PLA from USA-grown Corn
No Fillers or Additives
Prints at 230 - 250C
No Enclosure Required

Standard PLA+ → Print Settings

Most Generic PLA profiles will work fine for 3D-Fuel Standard PLA+.

However, at 3D-Fuel, we're working to develop optimized Standard PLA+ profiles for as many popular 3D printers as possible. Unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.

We have our developed profiles available here for download, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below: